Datasheet4U Logo Datasheet4U.com

LM2766 - Switched Capacitor Voltage Converter

General Description

The LM2766 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of 1.8 V to 5.5 V.

Two low-cost capacitors and a diode are used in this circuit to provide up to 20 mA of output current.

Key Features

  • 1 Doubles Input Supply Voltage.
  • SOT-23 6-Pin Package.
  • 20-Ω Typical Output Impedance.
  • 90% Typical Conversion Efficiency at 20 mA.
  • 0.1-µA Typical Shutdown Current 2.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM2760 3.3V Regulated Switched Capacitor Voltage Converter National Semiconductor
LM2765 Switched Capacitor Voltage Converter National Semiconductor
LM2767 Switched Capacitor Voltage Converter National Semiconductor
LM27 Factory Preset Thermostat National Semiconductor
LM2700 Step-up PWM DC/DC Converter National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM2765 Switched-Capacitor Voltage Converter
LM2767 Switched Capacitor Voltage Converter
LM27 Factory Preset Thermostat
LM2700 Step-up PWM DC/DC Converter
LM2700Q Step-up PWM DC/DC Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LM2766 SNVS071C – MARCH 2000 – REVISED SEPTEMBER 2015 LM2766 Switched Capacitor Voltage Converter 1 Features •1 Doubles Input Supply Voltage • SOT-23 6-Pin Package • 20-Ω Typical Output Impedance • 90% Typical Conversion Efficiency at 20 mA • 0.1-µA Typical Shutdown Current 2 Applications • Cellular Phones • Pagers • PDAs • Operational Amplifier Power Supplies • Interface Power Supplies • Handheld Instruments 3 Description The LM2766 CMOS charge-pump voltage converter operates as a voltage doubler for an input voltage in the range of 1.8 V to 5.5 V. Two low-cost capacitors and a diode are used in this circuit to provide up to 20 mA of output current.