LM111JAN Datasheet | Texas Instruments

FEATURES - 2 Operates from Single 5V Supply - Input Current: 200 n A max. Over Temperature - Offset Current: 20 n A max. Over Temperature - Differential Input Voltage Range: ±30V - Power Consumption: 135 m W at ±15V - Power Supply Voltage, single 5V to ±15V - Offset Voltage Null Capability - Strobe Capability DESCRIPTION The LM111 is a voltage parator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is patible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 m A. Both the inputs and the outputs of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR'ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710. Connection Diagrams Note: Pin 4 connected to case Figure 1. Metal Can Package Top View See Package Number LMC0008C Figure 2. Dual-In-Line Package Top View See Package Number NAB0008A Figure 3. Dual-In-Line Package Top View See Package Number J0014A Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all...