Datasheet4U Logo Datasheet4U.com

LM10692 - Power Management Unit

Description

The LM10692 is an advanced PMU containing six configurable, buck regulators for supplying power to advanced Flash Controllers in solid-state drives (SSDs).

The device is ideal for use in solid state drive designs.

Features

  • 1 Six High-efficiency Programmable Buck Regulators:.
  • Integrated FETs with Low RDSon.
  • Bucks Operate Phase Shifted to Reduce the Input.
  • Current ripple And Capacitor Size.
  • Output Voltage Programmable via Serial interface.
  • Under and Over Voltage Lock-out.
  • Automatic Internal Soft Start.
  • Output Current Overload and Thermal Shutdown Protection.
  • Active Discharge for Fast Discharge of Output Voltage When Buck is Disabled.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LM106 Voltage Comparator National Semiconductor
LM10 Operational Amplifier/Voltage National Semiconductor
LM10 Low Power Op Amp Linear Technology
LM100 Voltage Regulator Intersil
LM100 Voltage Regulator National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
LM10 Operational Amplifier and Voltage Reference
LM10000 AVS System Controller
LM10010 VID Voltage Programmer
LM10011 6/4-Bit VID Programmable Current DAC
LM101A-N Operational Amplifiers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LM10692 SNVSA53 – JULY 2014 LM10692 Power Management Unit for SandForce SF3700 SSD Controllers 1 Features •1 Six High-efficiency Programmable Buck Regulators: – Integrated FETs with Low RDSon – Bucks Operate Phase Shifted to Reduce the Input – Current ripple And Capacitor Size – Output Voltage Programmable via Serial interface – Under and Over Voltage Lock-out – Automatic Internal Soft Start – Output Current Overload and Thermal Shutdown Protection – Active Discharge for Fast Discharge of Output Voltage When Buck is Disabled • I2C Compatible Serial Interface, up to 1 MHz • Power-On-Reset Output with Delay and Input Voltage Trigger • Independent Enable Input Pins and Power Good output Pins for Control
Published: |