Datasheet4U Logo Datasheet4U.com

LF156 - JFET Input Operational Amplifiers

Download the LF156 datasheet PDF. This datasheet also covers the LF155 variant, as both devices belong to the same jfet input operational amplifiers family and are provided as variant models within a single manufacturer datasheet.

Description

The LFx5x devices are the first monolithic JFET input operational amplifiers to incorporate well-matched, high-voltage JFETs on the same chip with standard bipolar transistors (BI-FET™ Technology).

Features

  • 1 Advantages.
  • Replace Expensive Hybrid and Module FET Op Amps.
  • Rugged JFETs Allow Blow-Out Free Handling Compared With MOSFET Input Devices.
  • Excellent for Low Noise.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (LF155-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
LF156 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIERS STMicroelectronics
LF156 JFET-Input Operational Amplifiers Linear Technology
LF156 Series Monolithic JFET Input Operational Amplifiers National Semiconductor
LF156A JFET-Input Operational Amplifiers Linear Technology
LF151 WIDE BANDWIDTH SINGLE J-FET OPERATIONAL AMPLIFIER STMicroelectronics

Other Datasheets by Texas Instruments

Part Number Description
LF155 JFET Input Operational Amplifiers
LF147 Wide Bandwidth Quad JFET Input Operational Amplifiers
LF147JAN Wide Bandwidth Quad JFET Input Operational Amplifiers
LF147QML Wide Bandwidth Quad JFET Input Operational Amplifiers
LF198-N LF298 LFx98x Monolithic Sample-and-Hold Circuits (Rev. B)

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community LF155, LF156, LF256, LF257 LF355, LF356, LF357 SNOSBH0D – MAY 2000 – REVISED NOVEMBER 2015 LFx5x JFET Input Operational Amplifiers 1 Features •1 Advantages – Replace Expensive Hybrid and Module FET Op Amps – Rugged JFETs Allow Blow-Out Free Handling Compared With MOSFET Input Devices – Excellent for Low Noise Applications Using Either High or Low Source Impedance—Very Low 1/f Corner – Offset Adjust Does Not Degrade Drift or Common-Mode Rejection as in Most Monolithic Amplifiers – New Output Stage Allows Use of Large Capacitive Loads (5,000 pF) Without Stability Problems – Internal Compensation and Large Differential Input Voltage Capability • Common Features – Low Input Bias Current: 30 pA – Low Inpu
Published: |