Datasheet4U Logo Datasheet4U.com

ISO1500 - RS-485/RS-422 Transceiver

Description

The ISO1500 device is a galvanically-isolated differential line transceiver for TIA/EIA RS-485 and RS-422 applications.

This device has a 3-channel digital isolator and an RS-485 transceiver in an ultrasmall 16-pin SSOP package.

Features

  • 1 Meets or exceeds requirements of TIA/EIA-485-A.
  • Half-duplex transceiver.
  • Low-EMI 1-Mbps data rate.
  • Bus I/O protection.
  • ± 16 kV HBM ESD.
  • 1.71-V to 5.5-V Logic-side supply (VCC1), 4.5-V to 5.5-V Bus-side supply (VCC2).
  • 1/8 Unit load: up to 256 nodes on bus.
  • Failsafe receiver for bus open, short, and idle.
  • 100-kV/µs (typical) High common-mode transient immunity.
  • Extended temperature range from.
  • 40°C.

📥 Download Datasheet

📁 Similar Datasheet

  • ISO150 - Dual/ Isolated/ Bi-Directional DIGITAL COUPLER (Burr-Brown Corporation)
  • ISO15170 - Connectors (ITT)
  • ISO100 - Optically-Coupled Linear ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO1002 - Small Signal Amplifier (YUAN)
  • ISO1003-xx-x - Two Wires 4-20mA Isolated Signal Transmitter (YUAN)
  • ISO102 - SIGNAL ISOLATION BUFFER AMPLIFIERS (Burr-Brown Corporation)
  • ISO103 - Low-Cost/ Internally Powered ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO106 - SIGNAL ISOLATION BUFFER AMPLIFIERS (Burr-Brown Corporation)
  • ISO107 - High-Voltage/ Internally Powered ISOLATION AMPLIFIER (Burr-Brown Corporation)
  • ISO113 - Low-Cost/ High-Voltage/ Internally Powered OUTPUT ISOLATION AMPLIFIER (Burr-Brown Corporation)
Other Datasheets by Texas Instruments
  • ISO15 - 3.3-V Half- and Full-Duplex RS-485 Transceivers
  • ISO1540 - Low-Power Bidirectional I2C Isolators
  • ISO1540-Q1 - Low-Power Bidirectional I2C Isolators
  • ISO1541 - Low-Power Bidirectional I2C Isolators
  • ISO1541-Q1 - Low-Power Bidirectional I2C Isolators
  • ISO15M - 3.3-V Half- and Full-Duplex RS-485 Transceivers
  • ISO1042 - CAN Transceiver
  • ISO1042-Q1 - Automotive Isolated CAN Transceiver

Full PDF Text Transcription

Click to expand full text
Product Folder Order Now Technical Documents Tools & Software Support & Community ISO1500 SLLSF21D – SEPTEMBER 2018 – REVISED FEBRUARY 2020 ISO1500 3-kVRMS Basic Isolated RS-485/RS-422 Transceiver in Ultra-Small Package 1 Features •1 Meets or exceeds requirements of TIA/EIA-485-A • Half-duplex transceiver • Low-EMI 1-Mbps data rate • Bus I/O protection – ± 16 kV HBM ESD • 1.71-V to 5.5-V Logic-side supply (VCC1), 4.5-V to 5.
Published: |