ISO1050 Datasheet PDF - Texas Instruments CAN Transceiver Specs

ISO1050 - CAN Transceiver

Datasheet Summary

Description

The ISO1050 is a galvanically isolated CAN transceiver that meets the specifications of the ISO11898-2 standard.

Features

Meets the requirements of ISO11898-2.
5000-VRMS isolation (ISO1050DW).
2500-VRMS isolation (ISO1050DUB).
Fail-safe outputs.
Low loop delay: 150 ns (typical), 210 ns (maximum).
50-kV/μs typical transient immunity.
Bus-fault protection of.
27 V to 40 V.
Driver (TXD) dominant time-out function.
I/O voltage range supports 3.3 V and 5 V microprocessors.
Safety-related certifications.
VDE approv.

Datasheet Details

Part number	ISO1050
Manufacturer	Texas Instruments
File Size	2.72 MB
Description	CAN Transceiver
Datasheet	ISO1050 Datasheet
Additional preview pages of the ISO1050 datasheet.

📁 Similar Datasheet

ISO100 - Optically-Coupled Linear ISOLATION AMPLIFIER (Burr-Brown Corporation)

ISO1002 - Small Signal Amplifier (YUAN)

ISO1003-xx-x - Two Wires 4-20mA Isolated Signal Transmitter (YUAN)

ISO102 - SIGNAL ISOLATION BUFFER AMPLIFIERS (Burr-Brown Corporation)

ISO103 - Low-Cost/ Internally Powered ISOLATION AMPLIFIER (Burr-Brown Corporation)

ISO106 - SIGNAL ISOLATION BUFFER AMPLIFIERS (Burr-Brown Corporation)

ISO107 - High-Voltage/ Internally Powered ISOLATION AMPLIFIER (Burr-Brown Corporation)

ISO113 - Low-Cost/ High-Voltage/ Internally Powered OUTPUT ISOLATION AMPLIFIER (Burr-Brown Corporation)

ISO120 - Precision Low Cost ISOLATION AMPLIFIER (Burr-Brown Corporation)

ISO121 - Precision Low Cost ISOLATION AMPLIFIER (Burr-Brown Corporation)

Full PDF Text Transcription

Click to expand full text

ISO1050 SLLS983L – JUNE 2009 – REVISED OCTOBER 2023 ISO1050 Isolated CAN Transceiver 1 Features • Meets the requirements of ISO11898-2 • 5000-VRMS isolation (ISO1050DW) • 2500-VRMS isolation (ISO1050DUB) • Fail-safe outputs • Low loop delay: 150 ns (typical), 210 ns (maximum) • 50-kV/μs typical transient immunity • Bus-fault protection of –27 V to 40 V • Driver (TXD) dominant time-out function • I/O voltage range supports 3.3 V and 5 V microprocessors • Safety-related certifications – VDE approval per DIN EN IEC 60747-17 (VDE 0884-17) – UL 1577 approved – CSA approved for IEC 61010-1, IEC 60601-1 – TUV Reinforced Insulation Approval for EN/UL/CSA 62368-1 (ISO1050DW-Only) – CQC reinforced insulation per GB4943.

Published: Jul 2, 2023 |