Datasheet4U Logo Datasheet4U.com

HC165 - 8-Bit Parallel-Load Shift Registers

Description

The SNx4HC165 devices are 8-bit parallel-load shift registers that, when clocked, shift the data toward a serial (QH) output.

H) inputs that are enabled by a low level at the shift/load (SH/LD) input.

Features

  • 1 Wide Operating Voltage Range of 2 V to 6 V.
  • Outputs Can Drive Up to 10 LSTTL Loads.
  • Low Power Consumption, 80-µA Maximum ICC.
  • Typical tpd = 13 ns.
  • ±4-mA Output Drive at 5 V.
  • Low Input Current of 1 µA Maximum.
  • Complementary Outputs.
  • Direct Overriding Load (Data) Inputs.
  • Gated Clock Inputs.
  • Parallel-to-Serial Data Conversion.
  • On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
HC1650U03-200 90 Degree Hybrid Yantel
HC1600P03 Hybrid Coupler Yantel
HC160101C-VA Character LCD module HTDisplay
HC160101C-VA LCD HTDisplay
HC160102C-VA Character LCD module HTDisplay

Other Datasheets by Texas Instruments

Part Number Description
HC165EP 8-Bit Parallel-Load Shift Registers
HC165MEP 8-Bit Parallel-Load Shift Registers
HC165Q1 8-Bit Parallel-Load Shift Registers
HC165QQ1 8-Bit Parallel-Load Shift Registers
HC10 TRIPLE 3-INPUT POSITIVE-NAND GATES

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN54HC165, SN74HC165 SCLS116H – DECEMBER 1982 – REVISED DECEMBER 2015 SNx4HC165 8-Bit Parallel-Load Shift Registers 1 Features •1 Wide Operating Voltage Range of 2 V to 6 V • Outputs Can Drive Up to 10 LSTTL Loads • Low Power Consumption, 80-µA Maximum ICC • Typical tpd = 13 ns • ±4-mA Output Drive at 5 V • Low Input Current of 1 µA Maximum • Complementary Outputs • Direct Overriding Load (Data) Inputs • Gated Clock Inputs • Parallel-to-Serial Data Conversion • On Products Compliant to MIL-PRF-38535, All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
Published: |