DS90C031QML Datasheet | Texas Instruments

FEATURES - 2 Radiation guaranteed 100 krad(Si) - High impedance LVDS outputs with power-off - ±350 m V differential signaling - Low power dissipation - Low differential skew - Low propagation delay - Pin patible with DS26C31 - patible with IEEE 1596.3 SCI LVDS standard - patible with proposed TIA LVDS standard - Fail safe logic for floating inputs DESCRIPTION The DS90C031 is a quad CMOS differential line driver designed for applications requiring ultra low power dissipation and high data rates. The DS90C031 accepts TTL/CMOS input levels and translates them to low voltage (350 m V) differential output signals. In addition the driver supports a TRISTATE function that may be used to disable the output stage, thus dropping the device to a low idle power state of 11 m W typical. In addition, the DS90C031 provides power-off high impedance LVDS outputs. This feature assures minimal loading effect on the LVDS bus lines when VCC is not present. The DS90C031 and panion line receiver (DS90C032) provide a new alternative to high power psuedo-ECL devices for high speed pointto-point interface applications. Connection Diagram Figure 1. Dual-In-Line See Package Number NAD0016A & NAC0016A Figure 2. LCCC Package See Pacakage Number NAJ0020A Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. All trademarks are the property of their respective owners. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright © 2006- 2013, Texas Instruments Incorporated SNLS202B - MARCH 2006 - REVISED MARCH 2013 Functional Block Diagram .ti. Truth Table Enables EN EN- LH All other binations of ENABLE inputs Input DI X L...