DRV8601 - Haptic Driver

Product Overview

Texas Instruments

Datasheet Details

Part number	DRV8601
Manufacturer	Texas Instruments
File Size	1.23 MB
Description	Haptic Driver
Datasheet	DRV8601 Datasheet
Additional preview pages of the DRV8601 datasheet.

Product details

Description

The DRV8601 is a single-supply haptic driver that is optimized to drive a DC motor (also known as Eccentric Rotating Mass or ERM in haptics terminology) or a linear vibrator (also known as Linear Resonant Actuator or LRA in haptics terminology) using a single-ended PWM input signal.

Features

1 High Current Output: 400 mA.
Wide Supply Voltage Range (2.5 V to 5.5 V) for Direct Battery Operation.
Low Quiescent Current: 1.7 mA (Typical).
Fast Startup Time: 100 µs.
Low Shutdown Current: 10 nA.
Output Short-Circuit Protection.
Thermal Protection.
Enable Pin is 1.8-V Compatible.
Available in a 3-mm x 3-mm VQFN Package (DRB) and 2-mm x 2-mm MicroStar Junior™ PBGA Package (ZQV) 2.

📁 Similar Datasheet

DRV101 - PWM SOLENOID/VALVE DRIVER (Burr-Brown Corporation)
DRV102 - PWM SOLENOID/VALVE DRIVER (Burr-Brown Corporation)
DRV103 - PWM LOW-SIDE DRIVER (Burr-Brown Corporation)
DRV104 - 1.2A PWM High-Side Driver (Burr-Brown Corporation)
DRV1100 - HIGH POWER DIFFERENTIAL DRIVER AMPLIFIER (Burr-Brown Corporation)
DRV1101 - HIGH POWER DIFFERENTIAL LINE DRIVER (Burr-Brown Corporation)
DRV134 - (DRV134 / DRV135) AUDIO BALANCED LINE DRIVERS (Burr-Brown Corporation)
DRV135 - (DRV134 / DRV135) AUDIO BALANCED LINE DRIVERS (Burr-Brown Corporation)

Other Datasheets by Texas Instruments

DRV8662 - Piezo Haptic Driver
DRV8145-Q1 - Automotive Half Bridge Driver
DRV8212 - 11-V H-Bridge Motor Driver
DRV8262 - Single or Dual H-Bridge Motor Driver
DRV8301 - Three-Phase Gate Driver
DRV8301-Q1 - Automotive Three-Phase Gate Driver

Published: May 26, 2023 |