DRV134 Datasheet | Texas Instruments

Features - 1 Balanced Output - Low Distortion: 0.0005% at f = 1 k Hz - Wide Output Swing: 17Vrms into 600 Ω - High Capacitive Load Drive - High Slew Rate: 15 V/µs - Wide Supply Range: ±4.5 V to ±18 V - Low Quiescent Current: ±5.2 m A - 8-Pin DIP, SO-8, and SOL-16 Packages - panion to Audio Differential Line Receivers: INA134 and INA137 - Improved Replacement for SSM2142 2 Applications - Audio Differential Line Drivers - Audio Mix Consoles - Distribution Amplifiers - Graphic and Parametric Equalizers - Dynamic Range Processors - Digital Effects Processors - Tele Systems - Hi-Fi Equipment - Industrial Instrumentation 3 Description The DRV134 and DRV135 are differential output amplifiers that convert a single-ended input to a balanced output pair. These balanced audio drivers consist of high performance op amps with on-chip precision resistors. They are fully specified for high performance audio applications and have excellent ac specifications, including low distortion (0.0005% at 1 k Hz) and high slew rate (15 V/µs). The on-chip resistors are laser-trimmed for accurate gain and optimum output mon-mode rejection. Wide output voltage swing and high output drive capability allow use in a wide variety of demanding applications. They easily drive the large capacitive loads associated with long audio cables. Used in bination with the INA134 or INA137 differential receivers, they offer a plete solution for transmitting analog audio signals without degradation. The DRV134 is available in 8-pin DIP and SOL-16 surface-mount packages. The DRV135 es in a space-saving SO-8 surface-mount package. Both are specified for operation over the extended industrial temperature range, - 40°C to +85°C and operate from - 55°C to +125°C. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) SOIC (16) 10.30 mm × 7.50 mm DRV135 SOIC (8) 4.90 mm × 3.91 mm (1) For all available packages, see the orderable addendum at the end of the datasheet. 4 Simplified...