Datasheet4U Logo Datasheet4U.com

DP83826I - Low-Latency Low-Power 10/100Mbps Industrial Ethernet PHY

Download the DP83826I datasheet PDF. This datasheet also covers the DP83826E variant, as both devices belong to the same low-latency low-power 10/100mbps industrial ethernet phy family and are provided as variant models within a single manufacturer datasheet.

General Description

The DP83826 offers low and deterministic latency, low power and supports 10BASE-Te, 100BASE-TX Ethernet protocols to meet stringent requirements in real-time industrial Ethernet systems.

Key Features

  • Low and deterministic latency.
  • TX latency: 40 ns, RX latency: 170 ns.
  • Deterministic latency over power cycles < ±2 ns.
  • Fixed phase XI to TX_CLK relationship < ±2 ns.
  • Robust and small system solution.
  • Integrated circuitry for enhanced EMC.
  • IEC 61000-4-2 ESD: ±8 kV contact, ±15 kV air.
  • IEC 61000-4-4 EFT: ±4 kV @ 5 kHz, 100 kHz.
  • CISPR 22 conducted emissions Class B.
  • CISPR 22 radiated emissions Class B.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (DP83826E-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
DP83820 10/100/1000 Mb/s PCI Ethernet Network Interface Controller National Semiconductor
DP83821 10/100/1000 Mb/s PCI Ethernet Network Interface Controller National Semiconductor
DP83815 10/100 Mb/s Integrated PCI Ethernet Media Access Controller and Physical Layer National Semiconductor
DP83816 10/100 Mb/s Integrated PCI Ethernet Media Access Controller and Physical Layer National Semiconductor
DP83840A 10/100 Mb/s Ethernet Physical Layer National Semiconductor

Other Datasheets by Texas Instruments

Part Number Description
DP83826 Low-Latency Low-Power 10/100Mbps Industrial Ethernet PHY
DP83826E Low-Latency Low-Power 10/100Mbps Industrial Ethernet PHY
DP83822H low power 10/100 Mbps ethernet physical layer transceiver
DP83822HF low power 10/100 Mbps ethernet physical layer transceiver
DP83822I low power 10/100 Mbps ethernet physical layer transceiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
DP83826E, DP83826I SNLS647G – DECEMBER 2019 – REVISED JULY 2023 DP83826 Deterministic, Low-Latency, Low-Power, 10/100 Mbps, Industrial Ethernet PHY 1 Features • Low and deterministic latency – TX latency: 40 ns, RX latency: 170 ns – Deterministic latency over power cycles < ±2 ns – Fixed phase XI to TX_CLK relationship < ±2 ns • Robust and small system solution – Integrated circuitry for enhanced EMC – IEC 61000-4-2 ESD: ±8 kV contact, ±15 kV air – IEC 61000-4-4 EFT: ±4 kV @ 5 kHz, 100 kHz – CISPR 22 conducted emissions Class B – CISPR 22 radiated emissions Class B – Fast link-drop < 10 µs – Cable reach > 150 meters – Voltage mode line driver – Integrated terminations on MAC interface – Voltage tolerance: ±10% • Two selectable pin modes in single device – ENHANCED mode for additional feat