DCP020507 Datasheet | Texas Instruments

Features - 1-k V Isolation (operational): 1-second test - Continuous voltage applied across isolation barrier: 60 VDC / 42.5 VAC - UL1950 recognized ponent - EN55022 class B EMC performance - 7-Pin PDIP and 12-pin SOP packages - Input voltage: 5 V, 12 V, 15 V, or 24 V - Output voltage: 3.3 V, ±5 V, 7 V, 9 V, ±12 V, or ±15 - Device-to-device synchronization - Thermal protection - Short-circuit protection - High efficiency 2 Applications - Signal path isolation - Ground loop elimination - Data acquisition - Industrial control and instrumentation - Test equipment 3 Description The DCP02 series is a family of 2-W, isolated, unregulated DC/DC converter modules. Requiring a minimum of external ponents and including onchip device protection, the DCP02 series of devices provide extra features such as output disable and synchronization of switching frequencies. This bination of features and small size makes the DCP02 series of devices suitable for a wide range of applications, and is an easy-to-use solution in applications requiring signal path isolation. WARNING This product has operational isolation and is intended for signal isolation only. It should not be used as a part of a safety isolation circuit requiring reinforced isolation. See definitions in Feature Description Device Information PART NUMBER DCP02xxxx PACKAGE (1) PDIP (7) SOP (12) BODY SIZE (NOM) 19.18 mm × 10.60 mm 17.90 mm × 10.33 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. SYNC +VS OSC 800 k Hz Divideby-2 Reset Watchdog Startup PSU Thermal Shutdown Power Stage Power Controller ±VS Single Output Block Diagram +VOUT ±VOUT Dual Output Block...