DAC8551 Datasheet | Texas Instruments

Features - 1 Relative Accuracy: 8LSB - Glitch Energy: 0.1 n V-s - Micro Power Operation: 140 μA at 2.7 V - Power-On Reset to Zero - Power Supply: 2.7 V to 5.5 V - 16-Bit Monotonic - Settling Time: 10 μs to ±0.003% FSR - Low-Power Serial Interface with Schmitt-Triggered Inputs - On-Chip Output Buffer Amplifier with Rail-to-Rail Operation - Power-Down Capability - Binary Input - SYNC Interrupt Facility - Drop-In patible With DAC85x1 and DAC8550 (2's plement Input) 2 Applications - Process Control - Data Acquisition Systems - Closed-Loop Servo-Control - PC Peripherals - Portable Instrumentation - Programmable Attenuation 3 Description The DAC8551 is a small, low-power, voltage output, 16-bit digital-to-analog converter (DAC). It is monotonic, provides good linearity, and minimizes undesired code-to-code transient voltages. The DAC8551 uses a versatile 3-wire serial interface that operates at clock rates to 30 MHz and is patible with standard SPI™, QSPI™, Microwire™, and digital signal processor (DSP) interfaces. The DAC8551 requires an external reference voltage to set its output range. The DAC8551 incorporates a power-on-reset circuit that ensures the DAC output powers up at 0 V and remains there until a valid write takes place to the device. The DAC8551 contains a power-down feature , accessed over the serial interface, that reduces the current consumption of the device to 200 n A at 5 V. The low-power consumption of this device in normal operation makes it ideally suited for portable, batteryoperated equipment. The power consumption is 0.38 m W at 2.7 V, reducing to less than 1 μW in power‑down mode. For additional flexibilty, see the DAC8550 (SLAS476), a 2's plement-input counterpart to the DAC8551. Device Information(1) PART NUMBER PACKAGE BODY SIZE (NOM) VSSOP (8) 3.00 mm × 3.00 mm (1) For all available packages, see the orderable addendum at the end of the data sheet. VREF SYNC SCLK Functional Block...