CD74HCT163 Datasheet | Texas Instruments

Features - ’HC161, ’HCT161 4-Bit Binary Counter, Asynchronous Reset - ’HC163, ’HCT163 4-Bit Binary Counter, Synchronous Reset - Synchronous Counting and Loading - Two Count Enable Inputs for n-Bit Cascading - Look-Ahead Carry for High-Speed Counting - Fanout (Over Temperature Range) - Standard Outputs - - - 10 LSTTL Loads - Bus Driver Outputs - - . . . 15 LSTTL Loads - Wide Operating Temperature Range . . . -55o C to 125o C - Balanced Propagation Delay and Transition Times - Significant Power Reduction pared to LSTTL Logic ICs - HC Types - 2V to 6V Operation - High Noise Immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5V - HCT Types - 4.5V to 5.5V Operation - Direct LSTTL Input Logic patibility, VIL= 0.8V (Max), VIH = 2V (Min) - CMOS Input patibility, Il ≤ 1µA at VOL, VOH Description Two count enables, PE and TE, in each counter are provided for n-bit cascading. In all counters reset action occurs regardless of the level of the SPE, PE and TE inputs (and the clock input, CP, in the ’HC161 and ’HCT161 types). If a decade counter is preset to an illegal state or assumes an illegal state when power is applied, it will return to the normal sequence in one count as shown in state diagram. The look-ahead carry feature simplifies serial cascading of the counters. Both count enable inputs (PE and TE) must be high to count. The TE input is gated with the Q outputs of all four stages so that at the maximum count the terminal count (TC) output goes high for one clock period. This TC pulse is used to enable the next cascaded stage. Ordering Information PART NUMBER CD54HC161F3A CD54HC163F3A CD54HCT163F3A CD74HC161E CD74HC161M CD74HC161MT CD74HC161M96 TEMP. RANGE (o C) -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 -55 to 125 PACKAGE 16 Ld CERDIP 16 Ld CERDIP 16 Ld CERDIP 16 Ld PDIP 16 Ld SOIC 16 Ld SOIC 16 Ld SOIC The ’HC161, ’HCT161, ’HC163, and ’HCT163 are presettable synchronous counters that feature look-ahead...