Datasheet4U Logo Datasheet4U.com

CD74HC173E - Quad D-Type Flip-Flop

Download the CD74HC173E datasheet PDF. This datasheet also covers the CD74HC173 variant, as both devices belong to the same quad d-type flip-flop family and are provided as variant models within a single manufacturer datasheet.

Description

The CDx4HC173 and CDx4HCT173 contains four independent D-type flip-flops with shared clock (CP), reset (MR), and data enable (E1, E2) pins.

Features

  • Three-state buffered outputs.
  • Gated input and output enables.
  • Fanout (over temperature range).
  • Standard outputs : 10 LSTTL loads.
  • Bus driver outputs : 15 LSTTL loads.
  • Wide Operating Temperature Range : -55°C to 125°C.
  • Balanced propagation delay and transition times.
  • Significant power and reduction compared to LSTTL logic ICs.
  • HC types.
  • 2 V to 6 V operation.
  • High noise immunity: NIL = 30%, NIH = 30.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (CD74HC173-etcTI.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
CD74HC22106 QMOS 8 x 8 x 1 Crosspoint Switches with Memory Control Intersil Corporation
CD74HC373 OCTAL TRANSPARENT D-TYPE LATCHES NXP
CD74HC373E OCTAL TRANSPARENT D-TYPE LATCHES NXP
CD74HC373M OCTAL TRANSPARENT D-TYPE LATCHES NXP
CD74HC373M96 OCTAL TRANSPARENT D-TYPE LATCHES NXP

Other Datasheets by Texas Instruments

Part Number Description
CD74HC173 Quad D-Type Flip-Flop
CD74HC173M Quad D-Type Flip-Flop
CD74HC174 Hex D-Type Flip-Flop
CD74HC175 Quad D-Type Flip-Flop
CD74HC10 Triple 3-Input NAND Gates

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CD54HC173, CD74HC173, CD54HCT173, CD74HCT173 SCHS158F – NOVEMBER 1998 – REVISED MARCH 2022 CDx4HC173, CDx4HCT173 High-Speed CMOS Logic Quad D-Type Flip-Flop, ThreeState 1 Features • Three-state buffered outputs • Gated input and output enables • Fanout (over temperature range) – Standard outputs : 10 LSTTL loads – Bus driver outputs : 15 LSTTL loads • Wide Operating Temperature Range : -55°C to 125°C • Balanced propagation delay and transition times • Significant power and reduction compared to LSTTL logic ICs • HC types – 2 V to 6 V operation – High noise immunity: NIL = 30%, NIH = 30% of VCC at VCC = 5 V • HCT types – 4.5 V to 5.5 V Operation – Direct LSTTL input logic compatibility, VIL= 0.