Datasheet4U Logo Datasheet4U.com

CD4066B - CMOS Quad Bilateral Switch

Description

The CD4066B device is a quad bilateral switch intended for the transmission or multiplexing of analog or digital signals.

It is pin-for-pin compatible with the CD4016B device, but exhibits a much lower onstate resistance.

Features

  • 15V digital or ±7.5V peak-to-peak switching.
  • 125Ω typical on-state resistance for 15V operation.
  • Switch on-state resistance matched to within 5Ω over 15V signal-input range.
  • On-state resistance flat over full peak-to-peak signal range.
  • High on or off output-voltage ratio: 80dB typical at fis = 10kHz, RL = 1kΩ.
  • High degree of linearity:.

📥 Download Datasheet

📁 Similar Datasheet

  • CD4066B - CMOS QUAD BILATERAL SWITCH (RCA)
  • CD4066BC - Quad Bilateral Switch (National Semiconductor)
  • CD4066BM - Quad Bilateral Switch (National Semiconductor)
  • CD4066BMS - CMOS 4-Bit Magnitude Comparator (Intersil Corporation)
  • CD4066 - QUAD BILATERAL SWITCH (UTC)
  • CD4066A - CMOS Quad Bilateral Switch (RCA)
  • CD4066A - A four-switch digital and analog signals (ETC)
  • CD4060A - CMOS 14-Stage Ripple Carry Binary Counter / Divider/Oscillator (RCA)
  • CD4060B - CMOS 14-Stage Ripple Carry Binary Counter / Divider/Oscillator (General Electric Solid State)
  • CD4060BC - 14-Stage/ 12-Stage Ripple Carry Binary Counters (National Semiconductor)
Other Datasheets by Texas Instruments
  • CD4066B-Q1 - CMOS Quad Bilateral Switch
  • CD4066BE - CMOS Quad Bilateral Switch
  • CD4066BF - CMOS Quad Bilateral Switch
  • CD4066BM - CMOS Quad Bilateral Switch
  • CD4066BQ - CMOS Quad Bilateral Switch
  • CD4060B - CMOS 14-STAGE RIPPLE-CARRY BINARY COUNTER/DIVIDER
  • CD4063B - CMOS 4-BIT MAGNITUDE COMPARATOR
  • CD4067B - CMOS Analog Multiplexers/Demultiplexers

Full PDF Text Transcription

Click to expand full text
CD4066B SCHS051I – NOVEMBER 1998 – REVISED MAY 2024 CD4066B CMOS Quad Bilateral Switch 1 Features • 15V digital or ±7.5V peak-to-peak switching • 125Ω typical on-state resistance for 15V operation • Switch on-state resistance matched to within 5Ω over 15V signal-input range • On-state resistance flat over full peak-to-peak signal range • High on or off output-voltage ratio: 80dB typical at fis = 10kHz, RL = 1kΩ • High degree of linearity: <0.
Published: |