900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

CC2652RB Datasheet Preview

CC2652RB Datasheet

crystal-less BAW multiprotocol 2.4-GHz wireless MCU

No Preview Available !

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
CC2652RB
SWRS232A – FEBRUARY 2019 – REVISED MARCH 2019
CC2652RB SimpleLink™ crystal-less BAW multiprotocol 2.4-GHz wireless MCU
1 Device Overview
1.1 Features
1
• Microcontroller
– Powerful 48 MHz Arm® Cortex®-M4F Processor
– EEMBC CoreMark® Score: 148
– 352KB of In-System Programmable Flash
– 256KB of ROM for Protocols and Firmware
– 8KB of Cache SRAM (Alternatively available as
General-Purpose RAM)
– 80KB of Ultra-Low Leakage SRAM with parity
– 2-Pin cJTAG and JTAG Debugging
– Supports Over-the-Air Upgrade (OTA)
• Ultra-Low Power Sensor Controller With 4KB of
SRAM
– Sample, Store, and Process Sensor Data
– Operation Independent From System CPU
– Fast Wake-Up for Low-Power Operation
• TI-RTOS, Drivers, Bootloader, Bluetooth® 5 Low
Energy Controller, and IEEE 802.15.4 MAC in
ROM for Optimized Application Size
• RoHS-Compliant Package
– 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
• Peripherals
– Digital Peripherals Can be Routed to Any GPIO
– 4× 32-Bit or 8× 16-Bit General-Purpose Timers
– 12-Bit ADC, 200 kSamples/s, 8 Channels
– 2× Comparators With Internal Reference DAC
(1× Continuous Time, 1× Ultra-Low Power)
– Programmable Current Source
– 2× UART
– 2× SSI (SPI, MICROWIRE, TI)
– I2C
– I2S
– Real-Time Clock (RTC)
– AES 128- and 256-bit Crypto Accelerator
– ECC and RSA Public Key Hardware Accelerator
– SHA2 Accelerator (Full Suite Up to SHA-512)
– True Random Number Generator (TRNG)
– Capacitive Sensing, Up to 8 Channels
– Integrated Temperature and Battery Monitor
• External System
– Integrated Bulk Acoustic Wave (BAW) resonator
generating accurate clock for system and RF
– On-Chip Buck DC/DC Converter
• Low Power
– Wide Supply Voltage Range: 1.8 V to 3.8 V
– Active-Mode RX: 7.3 mA
– Active-Mode TX: 7.9 mA
– Active-Mode MCU 48 MHz (CoreMark):
3.4 mA (71 μA/MHz)
– Sensor Controller, Low Power-Mode, 2 MHz,
running infinite loop: 30.8 μA
– Sensor Controller, Active-Mode, 24 MHz,
running infinite loop: 808 μA
– Standby: 0.9 µA (RTC on, 80KB RAM and CPU
Retention)
• Radio Section
– 2.4-GHz RF Transceiver Compatible With
Bluetooth 5 Low Energy and IEEE 802.15.4
PHY and MAC
– Excellent Receiver Sensitivity:
–100 dBm for 802.15.4 (2.4 GHz),
–101 dBm for Bluetooth 5 Low Energy Coded
– Programmable Output Power Up to +5 dBm
– Suitable for Systems Targeting Compliance With
Worldwide Radio Frequency Regulations
– EN 300 328, (Europe)
– EN 300 440 Class 2 (Europe)
– FCC CFR47 Part 15 (US)
– ARIB STD-T66 (Japan)
• Development Tools and Software
LP-CC2652RB LaunchPad™ Development Kit
SimpleLink™ CC13x2 and CC26x2 software
development kit
SmartRF™ Studio for Simple Radio
Configuration
Sensor Controller Studio for Building Low-Power
Sensing Applications
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. ADVANCE INFORMATION for pre-production products; subject to
change without notice.




etcTI

CC2652RB Datasheet Preview

CC2652RB Datasheet

crystal-less BAW multiprotocol 2.4-GHz wireless MCU

No Preview Available !

CC2652RB
SWRS232A – FEBRUARY 2019 – REVISED MARCH 2019
www.ti.com
1.2 Applications
• 2400 to 2480 MHz ISM and SRD Systems (1)
With Down to 4 kHz of Receive Bandwidth
• Home and Building Automation
– Building Security systems – motion detector,
electronic door lock, door and window sensor,
gateway
– HVAC – thermostat, wireless environmental
sensor, HVAC system controller
– Fire safety systems – smoke detector, fire
alarm control panel
– Video surveillance – IP camera
– Garage Door Openers
– Elevator and escalator control
(1) See RF Core for additional details on supported protocol
standards, modulation formats, and data rates.
• Smart Grid and Automatic Meter Reading
– Water, Gas, and Electricity Meters
– Heat Cost Allocators
– Gateways
• Wireless Sensor Networks
– Long-Range Sensor Applications
• Asset Tracking and Management
• Factory Automation
• Wireless Healthcare Applications
• Energy Harvesting Applications
• Electronic Shelf Label (ESL)
1.3 Description
The CC2652RB BAW device is a multiprotocol wireless 2.4-GHz MCU targeting Thread, Zigbee®,
Bluetooth® 5 Low Energy, IEEE 802.15.4, IPv6-enabled smart objects (6LoWPAN), Wi-SUN®.
The CC2652RB device is a member of the SimpleLink™ MCU platform of cost-effective, ultra-low power,
2.4-GHz and Sub-1 GHz RF devices. Very low active RF and microcontroller (MCU) current, in addition to
sub-μA sleep current with up to 80KB of parity protected RAM retention, provide excellent battery lifetime
and allow operation on small coin-cell batteries and in energy-harvesting applications.
The CC2652RB device combines a flexible, very low-power RF transceiver with a powerful 48 MHz Arm®
Cortex®-M4F CPU in a platform supporting multiple physical layers and RF standards. A dedicated Radio
Controller (Arm® Cortex®-M0) handles low-level RF protocol commands that are stored in ROM or RAM,
thus ensuring ultra-low power and great flexibility. The low power consumption of the CC2652RB device
does not come at the expense of RF performance; the CC2652RB device has excellent sensitivity and
robustness (selectivity and blocking) performance.
The CC2652RB device is a highly integrated, true single-chip solution incorporating a complete RF system
and an on-chip DC/DC converter. In addition, the CC2652RB device has an integrated BAW (Bulk
Acoustic Wave) resonator used to generate the RF carrier to eliminate the need for an external 48 MHz
crystal.
Sensors can be handled in a very low-power manner by a programmable, autonomous ultra-low power
Sensor Controller CPU with 4KB of SRAM for program and data. The Sensor Controller, with its fast
wake-up and ultra-low-power 2 MHz mode is designed for sampling, buffering, and processing both
analog and digital sensor data; thus the MCU system can maximize sleep time and reduce active power.
The CC2652RB device is part of the SimpleLink™ microcontroller (MCU) platform, which consists of
Wi-Fi®, Bluetooth® Low Energy, Thread, Zigbee, Sub-1 GHz MCUs, and host MCUs, which all share a
common, easy-to-use development environment with a single core software development kit (SDK) and
rich tool set. A one-time integration of the SimpleLink platform enables you to add any combination of the
portfolio’s devices into your design, allowing 100 percent code reuse when your design requirements
change. For more information, visit ti.com/simplelink.
PART NUMBER
Device Information(1)
PACKAGE
BODY SIZE (NOM)
CC2652RB1FRGZ
VQFN (48)
7.00 mm × 7.00 mm
(1) For the most current part, package, and ordering information for all available devices, see the Package Option Addendum in Section 9,
or see the TI website.
2 Device Overview
Submit Documentation Feedback
Product Folder Links: CC2652RB
Copyright © 2019, Texas Instruments Incorporated


Part Number CC2652RB
Description crystal-less BAW multiprotocol 2.4-GHz wireless MCU
Maker etcTI
PDF Download

CC2652RB Datasheet PDF






Similar Datasheet

1 CC2652R Multiprotocol 2.4GHz Wireless MCU
etcTI
2 CC2652RB crystal-less BAW multiprotocol 2.4-GHz wireless MCU
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy