900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

CC2642R-Q1 Datasheet Preview

CC2642R-Q1 Datasheet

Low Energy Wireless MCU

No Preview Available !

Product
Folder
Order
Now
Technical
Documents
Tools &
Software
Support &
Community
CC2642R-Q1
SWRS229 – JANUARY 2020
CC2642R-Q1 SimpleLink™ Bluetooth® 5.1 Low Energy Wireless MCU
1 Device Overview
1.1 Features
1
• Qualified for automotive applications
• AEC-Q100 qualified with the following results:
– Device temperature grade 2: –40 °C to +105 °C
ambient operating temperature range
– Device HBM ESD Classification Level 2
– Device CDM ESD Classification Level C3
• Microcontroller
– Powerful 48-MHz Arm® Cortex®-M4F processor
– EEMBC CoreMark® score: 148
– Clock speed up to 48 MHz
– 352KB of in-system Programmable Flash
– 256KB of ROM for protocols and library
functions
– 8KB of Cache SRAM.
– 80KB of ultra-low leakage SRAM. The SRAM is
protected by parity to ensure high reliability of
operation.
– 2-pin cJTAG and JTAG debugging
– Supports Over-the-Air upgrade (OTA)
• RoHS-Compliant Package
– 7-mm x 7-mm RTC VQFN48 with wettable
flanks
• Radio section
– 2.4 GHz RF transceiver compatible with
Bluetooth® 5.1 Low Energy and earlier
specifications
– Excellent receiver sensitivity:
–105 dBm for Bluetooth 125-kbps (LE coded
PHY)
–97 dBm for 1-Mbps PHY
– Output power up to +5 dBm with temperature
compensation
– Suitable for systems targeting compliance with
worldwide radio frequency regulations:
– EN 300 328 (Europe)
– EN 300 440 Category 2 (Europe)
– FCC CFR47 Part 15 (US)
– ARIB STD-T66 (Japan)
• Low power
– Wide supply voltage range: 1.8 V to 3.63 V
– Active-Mode RX: 6.9 mA
– Active-Mode TX 0 dBm: 7.3 mA
– Active-Mode TX 5 dBm: 9.6 mA
– Active-Mode MCU 48 MHz (CoreMark):
3.4 mA (71 μA/MHz)
– Sensor Controller, Low Power-Mode, 2 MHz,
running infinite loop: 31.9 μA
– Sensor Controller, Active-Mode, 24 MHz,
running infinite loop: 808.5 μA
– Standby: 0.94 µA (RTC on, 80KB RAM and
CPU retention)
– Shutdown: 150 nA (wakeup on external events)
• Peripherals
– 31 GPIOs, digital peripherals can be routed to
any GPIO
– 4 × 32-bit or 8 × 16-bit general-purpose timers
– 12-Bit ADC, 200 kSamples/s, 8 channels
– 2× comparators with internal reference DAC
(1× continuous time, 1× ultra-low power)
– Programmable current source
– 2× UART
– 2× SSI (SPI, MICROWIRE, TI)
– I2C
– I2S
– Real-Time Clock (RTC)
– AES 128-bit and 256-bit Crypto Accelerator
– ECC and RSA Public Key Hardware Accelerator
– SHA2 Accelerator (full suite up to SHA-512)
– True Random Number Generator (TRNG)
– Capacitive sensing, up to 8 channels
– Integrated temperature and battery monitor
• External system
– On-chip Buck DC/DC converter
• Ultra-low power sensor controller with 4KB of
SRAM
– Operation independent from system CPU
– Sample, store, and process sensor data
– Fast wake-up for low-power operation
TI-RTOS, drivers, bootloader, Bluetooth 5.1 Low
Energy controller in ROM for optimized application
size
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

CC2642R-Q1 Datasheet Preview

CC2642R-Q1 Datasheet

Low Energy Wireless MCU

No Preview Available !

CC2642R-Q1
SWRS229 – JANUARY 2020
www.ti.com
• Development Tools and Software
CC26x2R1 LaunchPad™ Development Kit
SimpleLink™ CC13x2 and CC26x2 Software
Development Kit (SDK)
SmartRF™ Studio for simple radio configuration
1.2 Applications
Automotive
Car access and security systems
Passive entry passive start (PEPS)
Phone as a key (PaaK)
Remote keyless entry (RKE)
Battery management system (BMS)
Advanced driver assistance systems (ADAS)
Telematics control unit (TCU)
Sensor Controller Studio for building low-power
sensing applications
Automotive Bluetooth Low Energy car access
satellite node reference design
Bluetooth Angle of Arrival (AoA) Antenna
Design Application Report
Head unit
Industrial
Industrial transport - asset tracking
Factory automation and control
1.3 Description
The SimpleLink™ CC2642R-Q1 device is an AEC-Q100 compliant wireless microcontroller (MCU)
targeting Bluetooth 5 Low Energy automotive applications. The device is optimized for low-power wireless
communication in applications such as car access including passive entry passive start (PEPS) and
remote keyless entry (RKE), battery management systems (BMS), car sharing, piloted parking, cable
replacement, and smartphone connectivity. The highlighted features of this device include:
• Support for Bluetooth® 5.1 features: LE Coded PHYs (Long Range), LE 2-Mbit PHY (High Speed),
Advertising Extensions, Multiple Advertisement Sets, CSA#2, as well as backwards compatibility and
support for key features from the Bluetooth® 5 and earlier Low Energy specifications.
• Fully-qualified Bluetooth® 5.1 software protocol stack included with the SimpleLink™ CC13x2 and
CC26x2 Software Development Kit (SDK), which enables Angle of Arrival (AoA).
• Longer battery life wireless applications with low standby current of 0.94 µA with full RAM retention.
• AEC-Q100 qualified at the Grade 2 temperature range (–40 °C to +105 °C) and is offered in a 7-mm x
7-mm VQFN package with wettable flanks.
• Dedicated software controlled radio controller (Arm® Cortex®-M0) providing flexible low-power RF
transceiver capability to support multiple physical layers and RF standards, such as real-time
localization (RTLS) technologies.
• Excellent radio sensitivity and robustness (selectivity and blocking) performance for Bluetooth® Low
Energy (-105 dBm for 125-kbps LE Coded PHY).
The CC2642R-Q1 device is part of the SimpleLink™ MCU platform, which consists of Wi-Fi®, Bluetooth
Low Energy, Thread, Zigbee®, Sub-1 GHz MCUs, and host MCUs that all share a common, easy-to-use
development environment with a single core software development kit (SDK) and rich tool set. A one-time
integration of the SimpleLink™ platform enables you to add any combination of the portfolio’s devices into
your design, allowing 100 percent code reuse when your design requirements change. For more
information, visit SimpleLink™ MCU platform.
PART NUMBER
Device Information(1)
PACKAGE
BODY SIZE (NOM)
CC2642R1TWFRTCQ1
VQFN (48)
7.00 mm × 7.00 mm
(1) For the most current part, package, and ordering information for all available devices, see the Package Option Addendum in Section 9,
or see the TI website.
2 Device Overview
Submit Documentation Feedback
Product Folder Links: CC2642R-Q1
Copyright © 2020, Texas Instruments Incorporated


Part Number CC2642R-Q1
Description Low Energy Wireless MCU
Maker etcTI
PDF Download

CC2642R-Q1 Datasheet PDF






Similar Datasheet

1 CC2642R-Q1 Low Energy Wireless MCU
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy