900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

CC2620 Datasheet Preview

CC2620 Datasheet

RF4CE Wireless MCU

No Preview Available !

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
Reference
Design
CC2620
SWRS178C – FEBRUARY 2015 – REVISED JULY 2016
CC2620 SimpleLink™ ZigBee® RF4CE Wireless MCU
1 Device Overview
1.1 Features
1
• Microcontroller
– Powerful ARM® Cortex®-M3
– EEMBC CoreMark® Score: 142
– Up to 48-MHz Clock Speed
– 128KB of In-System Programmable Flash
– 8KB of SRAM for Cache
– 20KB of Ultralow-Leakage SRAM
– 2-Pin cJTAG and JTAG Debugging
– Supports Over-The-Air Upgrade (OTA)
• Ultralow-Power Sensor Controller
– Can Run Autonomous From the Rest of the
System
– 16-Bit Architecture
– 2KB of Ultralow-Leakage SRAM for Code and
Data
• Efficient Code Size Architecture, Placing Drivers,
IEEE 802.15.4 MAC, and Bootloader in ROM
• RoHS-Compliant Packages
– 4-mm × 4-mm RSM VQFN32 (10 GPIOs)
– 7-mm × 7-mm RGZ VQFN48 (31 GPIOs)
• Peripherals
– All Digital Peripheral Pins Can Be Routed to
Any GPIO
– Four General-Purpose Timer Modules
(Eight 16-Bit or Four 32-Bit Timers, PWM Each)
– 12-Bit ADC, 200-ksamples/s, 8-Channel Analog
MUX
– Continuous Time Comparator
– Ultralow-Power Analog Comparator
– Programmable Current Source
– UART
– 2× SSI (SPI, MICROWIRE, TI)
– I2C
– I2S
– Real-Time Clock (RTC)
– AES-128 Security Module
– True Random Number Generator (TRNG)
– 10, 15, or 31 GPIOs, Depending on Package
Option
– Support for Eight Capacitive-Sensing Buttons
– Integrated Temperature Sensor
• External System
– On-Chip internal DC-DC Converter
– Very Few External Components
– Seamless Integration With the SimpleLink™
CC2590 and CC2592 Range Extenders
• Low Power
– Wide Supply Voltage Range
• Normal Operation: 1.8 to 3.8 V
• External Regulator Mode: 1.7 to 1.95 V
– Active-Mode RX: 5.9 mA
– Active-Mode TX at 0 dBm: 6.1 mA
– Active-Mode TX at +5 dBm: 9.1 mA
– Active-Mode MCU: 61 µA/MHz
– Active-Mode MCU: 48.5 CoreMark/mA
– Active-Mode Sensor Controller: 8.2 µA/MHz
– Standby: 1 µA (RTC Running and RAM/CPU
Retention)
– Shutdown: 100 nA (Wake Up on External
Events)
• RF Section
– 2.4-GHz RF Transceiver Compatible With IEEE
802.15.4 PHY and MAC
– Excellent Receiver Sensitivity (–100 dBm),
Selectivity, and Blocking Performance
– Link budget of 105 dB
– Programmable Output Power up to +5 dBm
– Single-Ended or Differential RF Interface
– Suitable for Systems Targeting Compliance With
Worldwide Radio Frequency Regulations
• ETSI EN 300 328 (Europe)
• EN 300 440 Class 2 (Europe)
• FCC CFR47 Part 15 (US)
• ARIB STD-T66 (Japan)
• Tools and Development Environment
– Full-Feature and Low-Cost Development Kits
– Multiple Reference Designs for Different RF
Configurations
– Packet Sniffer PC Software
– Sensor Controller Studio
– RemoTI™ Target Emulator
– SmartRF™ Studio
– SmartRF Flash Programmer 2
– IAR Embedded Workbench® for ARM
– Code Composer Studio™
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

CC2620 Datasheet Preview

CC2620 Datasheet

RF4CE Wireless MCU

No Preview Available !

CC2620
SWRS178C – FEBRUARY 2015 – REVISED JULY 2016
www.ti.com
1.2 Applications
• Remote Controls
• Set-Top Boxes
• TVs
• Media Players
• DVDs
• OTTs
• Consumer Electronics
• HID Applications
1.3 Description
The CC2620 device is a wireless MCU targeting ZigBee® RF4CE remote control applications, both
controller and target node.
The device is a member of the CC26xx family of cost-effective, ultralow power, 2.4-GHz RF devices. Very
low active RF and MCU current and low-power mode current consumption provide excellent battery
lifetime and allow for operation on small coin cell batteries and in energy-harvesting applications.
The CC2620 device contains a 32-bit ARM Cortex-M3 processor that runs at 48 MHz as the main
processor and a rich peripheral feature set that includes a unique ultralow power sensor controller. This
sensor controller is ideal for interfacing external sensors and for collecting analog and digital data
autonomously while the rest of the system is in sleep mode. Thus, the CC2620 device is ideal for ZigBee
RF4CE remote controls with features like voice, motion, RF-IR hybrid remotes, and qwerty keyboards and
STB/target nodes with capacitive touch.
The IEEE 802.15.4 MAC is embedded into ROM and runs partly on an ARM Cortex-M0 processor. This
architecture improves overall system performance and power consumption and frees up flash memory for
the application.
Software stack support for this device includes: ZigBee RF4CE stack (RemoTI) which is available free of
charge from www.ti.com.
PART NUMBER
Device Information(1)
PACKAGE
CC2620F128RGZ
VQFN (48)
CC2620F128RSM
VQFN (32)
(1) For more information, see Section 9, Mechanical Packaging and Orderable Information.
BODY SIZE (NOM)
7.00 mm × 7.00 mm
4.00 mm × 4.00 mm
2 Device Overview
Submit Documentation Feedback
Product Folder Links: CC2620
Copyright © 2015–2016, Texas Instruments Incorporated


Part Number CC2620
Description RF4CE Wireless MCU
Maker etcTI
PDF Download

CC2620 Datasheet PDF






Similar Datasheet

1 CC2620 RF4CE Wireless MCU
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy