CC2564MODA
Description
The CC2564MODx module from Texas Instruments™ is a complete Bluetooth® BR/EDR, and low energy HCI solution that reduces design effort, cost, and time to market. The CC2564MODx module includes TI's seventh-generation core and provides a versatile, product-proven solution that is Bluetooth 4.1-compliant.
Key Features
- Module Solution Based on TI's CC2564B DualMode Bluetooth®, Available in Two Variants: - CC2564MODA With Integrated Antenna - CC2564MODN With External Antenna
- Fully Certified Module for FCC, IC, CE, and Bluetooth 4.1 - FCC (Z64-2564N), IC (451I-2564N) Modular Grant (see Section 6.2.1.3, Section 7.1.1, and Section 7.1.2) - CE Certified as Summarized in the Declaration of Conformity (see Section 7.1.3) - Bluetooth 4.1 Controller Subsystem Qualified (CC2564MODN: QDID 55257; CC2564MODA: QDID 64631). Compliant up to the HCI Layer
- Highly Optimized for Design Into Small Form Factor Systems and Flexibility: - CC2564MODA - Integrated Chip Antenna - Module Footprint: 35 Terminals, 0.8-mm Pitch, 7 mm × 14 mm × 1.4 mm (Typical) - CC2564MODN - Single-Ended 50-Ω RF Interface - Module Footprint: 33 Terminals, 0.8-mm Pitch, 7 mm × 7 mm × 1.4 mm (Typical)
- BR and EDR Features Include: - Up to Seven Active Devices - Scatternet: Up to Three Piconets Simultaneously, One as Master and Two as Slaves - Up to Two Synchronous Connection Oriented (SCO) Links on the Same Piconet - Support for All Voice Air-Coding-Continuously Variable Slope Delta (CVSD), A-Law, µ-Law, and Transparent (Uncoded) - Assisted Mode for HFP 1.6 Wideband Speech (WBS) Profile or A2DP Profile to Reduce Host Processing and Power - Support of Multiple Bluetooth Profiles With Enhanced QoS
- Low Energy Features Include: - Support of up to 10 Simultaneous Connections - Multiple Sniff Instances Tightly Coupled to Achieve Minimum Power Consumption - Independent Buffering for Low Energy Allows Large Numbers of Multiple Connections Without Affecting BR or EDR Performance - Built-In Coexistence and Prioritization Handling for BR, EDR, and Low Energy
- Best-in-Class Bluetooth (RF) Performance (TX Power, RX Sensitivity, Blocking) - Class 1.5 TX Power up to +10 dBm - -93 dbm Typical RX Sensitivity - Internal Temperature Detection and Compensation to Ensure Minimal Variation in RF Performance Over Temperature, No External Calibration Required - Improved Adaptive Frequency Hopping (AFH) Algorithm With Minimum Adaptation Time - Provides Longer Range, Including Twice the Range of Other Low-Energy-Only Solutions
- Advanced Power Management for Extended Battery Life and Ease of Design - On-Chip Power Management, Including Direct Connection to Battery - Low Power Consumption for Active, Standby, and Scan Bluetooth Modes - Shutdown and Sleep Modes to Minimize Power Consumption
- Physical Interfaces: - UART Interface With Support for Maximum Bluetooth Data Rates - UART Transport Layer (H4) With Maximum Rate of 4 Mbps - Three-Wire UART Transport Layer (H5) With Maximum Rate of 4 Mbps - Fully Programmable Digital Pulse-Code Modulation (PCM)-I2S Codec Interface
- CC256x Bluetooth Hardware Evaluation Tool: PC-Based Application to Evaluate RF Performance of the Device and Configure Service Pack 1 An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications, intellectual property matters and other important disclaimers. PRODUCTION DATA.
