CC2564 Datasheet | Texas Instruments

Overview 1.1 Features - TI's Single-Chip Bluetooth Solution With Bluetooth Basic Rate (BR), Enhanced Data Rate (EDR), and Low Energy (LE) Support; Available in Two Variants: - Dual-Mode Bluetooth CC2564 Controller - Bluetooth CC2560 Controller - CC2564 Bluetooth 4.1 Controller Subsystem Qualified (QDID 58852); pliant up to the HCI Layer - Highly Optimized for Low-Cost Designs: - Single-Ended 50-Ω RF Interface - Package Footprint: 76 Terminals, 0.6-mm Pitch, 8-mm x 8-mm mr QFN - BR/EDR Features Include: - Up to 7 Active Devices - Scatternet: Up to 3 Piconets Simultaneously, 1 as Master and 2 as Slaves - Up to 2 SCO Links on the Same Piconet - Support for All Voice Air-Coding - Continuously Variable Slope Delta (CVSD), A-Law, μ-Law, and Transparent (Uncoded) - CC2560B/CC2564B Devices Provide an Assisted Mode for HFP 1.6 Wideband Speech (WBS) Profile or A2DP Profile to Reduce Host Processing and Power - Support of Multiple Bluetooth Profiles With Enhanced Qo S - LE Features Include: - Support of Up to 10 (CC2564B) Connections - Multiple Sniff Instances Tightly Coupled to Achieve Minimum Power Consumption - Independent Buffering for LE Allows Large Numbers of Multiple Connections Without Affecting BR/EDR Performance. - Built-In Coexistence and Prioritization Handling for BR/EDR and LE - Best-in-Class Bluetooth (RF) Performance (TX Power, RX Sensitivity, Blocking) - Class 1 TX Power Up to +10 d Bm - - 95 dbm Typical RX Sensitivity - Internal Temperature Detection and pensation to Ensure Minimal Variation in RF Performance Over Temperature, No External Calibration Required - Improved Adaptive Frequency Hopping (AFH) Algorithm With Minimum Adaptation Time - Provides Longer Range, Including 2x Range Over Other LE-Only Solutions - Advanced Power Management for Extended Battery Life and Ease of Design - On-Chip Power Management, Including Direct Connection to Battery - Low Power Consumption for Active, Standby, and Scan Bluetooth Modes - Shutdown and Sleep Modes to Minimize...