900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf






etcTI

CC2541-Q1 Datasheet Preview

CC2541-Q1 Datasheet

SimpleLink Bluetooth Low Energy Wireless MCU

No Preview Available !

Product
Folder
Sample &
Buy
Technical
Documents
Tools &
Software
Support &
Community
CC2541-Q1
SWRS128 – JUNE 2014
CC2541-Q1 SimpleLink™ Bluetooth® Low Energy Wireless MCU for Automotive
1 Device Overview
1.1 Features
1
• RF
– 2.4-GHz Bluetooth Low Energy Compliant and
Proprietary RF Wireless MCU
– Supports Data Rates of 250 kbps, 500 kbps, 1
Mbps, and 2 Mbps
– Excellent Link Budget, Enabling Long-Range
Applications Without External Front End
– Programmable Output Power up to 0 dBm
– Excellent Receiver Sensitivity (–94 dBm at
1 Mbps), Selectivity, and Blocking Performance
– Suitable for Systems Targeting Compliance With
Worldwide Radio Frequency Regulations: ETSI
EN 300 328 and EN 300 440 Class 2 (Europe),
FCC CFR47 Part 15 (US), and ARIB STD-T66
(Japan)
• Layout
– Few External Components
– 6 mm × 6 mm QFN-40 Package
• Low Power
– Active-Mode RX Down to: 18.3 mA
– Active-Mode TX (0 dBm): 18.6 mA
– Power Mode 1 (4-µs Wake-Up): 270 µA
– Power Mode 2 (Sleep Timer On): 1 µA
– Power Mode 3 (External Interrupts): 0.5 µA
– Wide Supply-Voltage Range (2 V to 3.6 V)
• Microcontroller
– High-Performance and Low-Power 8051
Microcontroller Core With Code Prefetch
– 256KB In-System Programmable Flash
– 8KB of RAM With Retention in All Power Modes
– Hardware Debug Support
– Extensive Baseband Automation, Including
Auto-Acknowledgment and Address Decoding
– Retention of All Relevant Registers in All Power
Modes
• Peripherals
– Powerful Five-Channel DMA
– IR Generation Circuitry
– General-Purpose Timers (One 16-Bit, Two 8-Bit)
– 32-kHz Sleep Timer With Capture
– Accurate Digital RSSI Support
– Battery Monitor and Temperature Sensor
– 12-Bit ADC With Eight Channels and
Configurable Resolution
– AES Security Coprocessor
– Two Powerful USARTs With Support for Several
Serial Protocols
– 23 General-Purpose I/O Pins
(21 × 4 mA, 2 × 20 mA)
– I2C interface
– 2 I/O Pins Have LED Driving Capabilities
– Watchdog Timer
– Integrated High-Performance Comparator
• Development Tools
– CC2541 Evaluation Module
– SmartRF™ Software
– IAR Embedded Workbench™ Available
Bluetooth v4.0 Compliant Protocol Stack for
Single-Mode BLE Solution
– Complete Power-Optimized Stack, Including
Controller and Host
• GAP – Central, Peripheral, Observer, or
Broadcaster (Including Combination Roles)
• ATT / GATT – Client and Server
• SMP – AES-128 Encryption and Decryption
• L2CAP
– Sample Applications and Profiles
• Generic Applications for GAP Central and
Peripheral Roles
• Proximity, Accelerometer, Simple Keys, and
Battery GATT Services
• More Applications Supported in BLE
Software Stack
– Multiple Configuration Options
• Single-Chip Configuration, Allowing
Applications to Run on CC2541-Q1
• Network Processor Interface for Applications
Running on an External Microcontroller
– BTool–Windows PC Application for Evaluation,
Development, and Test
– Over the Air Update Capable
1
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.




etcTI

CC2541-Q1 Datasheet Preview

CC2541-Q1 Datasheet

SimpleLink Bluetooth Low Energy Wireless MCU

No Preview Available !

CC2541-Q1
SWRS128 – JUNE 2014
www.ti.com
1.2 Applications
• 2.4-GHz Bluetooth Low-Energy Systems
• Proprietary 2.4-GHz Systems
• Keyless Entry (Passive and Remote)
• Tire Pressure Monitoring
• Proximity Sensing
• Interface and Control
• Diagnostics and Maintenance
• Cable Replacement
• Sensor Nodes
• Infotainment and Media
• Smart Phone Connectivity
• Beacons
1.3 Description
The CC2541-Q1 is a power-optimized true Wireless MCU solution for both Bluetooth low energy and
proprietary 2.4-GHz applications. This device enables the building of robust nework nodes with low total
bill-of-material costs. The CC2541-Q1 combines the excellent performance of a leading RF transceiver
with an industry-standard enhanced 8051 MCU, in-system programmable flash memory, 8KB of RAM, and
many other powerful supporting features and peripherals. The CC2541-Q1 is highly suited for systems in
which ultralow power consumption is required, which is specified by various operating modes. Short
transition times between operating modes further enable low power consumption.
The CC2541-Q1 comes in a 6 mm x 6 mm QFN40 package.
PART NUMBER
Device Information(1)
PACKAGE
CC2541F256TRHARQ1
RHA (40)
CC2541F256TRHATQ1
RHA (40)
(1) For more information, see Section 8, Mechanical Packaging and Orderable Information.
BODY SIZE
6.00 mm × 6.00 mm
6.00 mm × 6.00 mm
2 Device Overview
Submit Documentation Feedback
Product Folder Links: CC2541-Q1
Copyright © 2014, Texas Instruments Incorporated


Part Number CC2541-Q1
Description SimpleLink Bluetooth Low Energy Wireless MCU
Maker etcTI
PDF Download

CC2541-Q1 Datasheet PDF






Similar Datasheet

1 CC2541-Q1 SimpleLink Bluetooth Low Energy Wireless MCU
etcTI





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z



Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy