CC2533
Key Features
- 234 RF/Layout - 2.4-GHz IEEE 802.15.4 Compliant RF Transceiver - Excellent Receiver Sensitivity and Robustness to Interference - Programmable Output Power Up to 4.5 dBm - Boost-Mode TX at 7 dBm - Very Few External Components - Only a Single Crystal Needed for Asynchronous Networks - Space-Saving 6-mm × 6-mm QFN40 Package - Suitable for Systems Targeting Compliance With Worldwide Radio-Frequency Regulations: ETSI EN 300 328 and EN 300 440 (Europe), FCC CFR47 Part 15 (US), and ARIB STD-T-66 (Japan) - Pin- and Software-Compatible With the CC2530Fxxx Series
- Low Power - Active-Mode RX (CPU Idle): 25 mA - Active Mode TX at 0 dBm (CPU Idle): 28.5 mA - Power Mode 1 (4 ms Wake-Up): 0.2 mA - Power Mode 2 (Sleep Timer Running): 1 mA - Power Mode 3 (External Interrupts): 0.5 mA - Wide Supply-Voltage Range (2 V-3.6 V)
- Microcontroller - High-Performance and Low-Power 8051 Microcontroller Core With Code Prefetch - 64- or 96-KB In-System-Programmable Flash - 4- or 6-KB RAM With Retention in All Power Modes - Hardware Debug Support
- Peripherals - Powerful Five-Channel DMA - IEEE 802.15.4 MAC Timer, General-Purpose Timers (One 16-Bit, Two 8-Bit) - IR Generation Circuitry - 32-kHz Sleep Timer With Capture - CSMA/CA Hardware Support - Accurate Digital RSSI/LQI Support - Battery Monitor Comparator - Random Number Generation - AES Security Coprocessor - Two Powerful USARTs With Support for UART and SPI - I2C Interface - 23 General-Purpose I/O Pins - Watchdog Timer
- Development Tools - CC2533 Remote Control Development Kit for RF4CE - CC2533 Development Kit - CC2533EMK Evaluation Modules - SmartRF™ Software - Packet Sniffer - IAR Embedded Workbench™ Available
