Datasheet Details
| Part number | BQ79600-Q1 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 3.78 MB |
| Description | Automotive SPI/UART Communication Interface Functional-Safety Compliant |
| Datasheet |
 BQ79600-Q1 Datasheet
|
|
|
| Part number | BQ79600-Q1 |
|---|---|
| Manufacturer | Texas Instruments |
| File Size | 3.78 MB |
| Description | Automotive SPI/UART Communication Interface Functional-Safety Compliant |
| Datasheet |
BQ79600-Q1 Datasheet
|
|
|
|
The BQ79600-Q1 is a communication (bridge) IC designed to interface between a microcontroller (MCU) and TI battery monitoring ICs, for example the BQ7961X-Q1.
The information from the MCU is translated by the device to signals recognized by TI’s battery management daisy chain protocol, and transmitted out.
And signals from daisy chain are decoded to bit stream and then sent back to MCU.
www.ti.com BQ79600-Q1 SLUSDS1A – NOVEMBER 2019 – REVISEDBQAU7G9U6S0T02-Q0210 SLUSDS1A – NOVEMBER 2019 – REVISED AUGUST 2020 BQ79600-Q1 Automotive SPI/UART Communication Interface Functional-Safety Compliant With.
| Part Number | Description |
|---|---|
| BQ79612-Q1 | Functional Safety-Compliant Automotive Balancer and Integrated Hardware Protector |
| BQ79614-Q1 | Functional Safety-Compliant Automotive Balancer and Integrated Hardware Protector |
| BQ79616 | 16-Series Battery Monitor and Integrated Hardware Protector |
| BQ79616-Q1 | Functional Safety-Compliant Automotive Balancer and Integrated Hardware Protector |
| BQ79616H-Q1 | Functional Safety-Compliant Automotive Balancer and Integrated Hardware Protector |
| BQ725 | 2-4 Cell Li+ Battery SMBus Charge Controller |
| BQ735 | 1- to 4-Cell Li+ Battery SMBus Charge Controller |
| bq76200 | high-voltage battery pack front-end charge/discharge high-side NFET driver |
| bq76920 | 3-series to 15-series cell battery monitor |
| bq76925 | Host-Controlled Analog Front End |