ADS5463-SP Datasheet | Texas Instruments

Features - 1 500-MSPS Sample Rate - Available With Radiation Hardness Specified (RHA) - Total Ionizing Dose 100 krad(Si), ELDRS Free 100 krad(Si) - 12-Bit Resolution, 10-Bits Effective Number of Bits (ENOB) - SNR > 64.5 d BFS at 450 MHz and 500 MSPS - SFDR > 64.0 d Bc at 450 MHz and 500 MSPS - 2.2-VPP Differential Input Voltage - LVDS-patible Outputs - Total Power Dissipation: 2.2 W - Offset Binary Output Format - Output Data Transitions on the Rising and Falling Edges of a Half-Rate Output Clock - On-Chip Analog Buffer, Track and Hold, and Reference Circuit - Available in a 84-Pin Ceramic Nonconductive Tie Bar Package (HFG) - Military Temperature Range (- 55°C to 125°C Tcase) 2 Applications - Test and Measurement Instrumentation - Software-Defined Radio - Data Acquisition - Power Amplifier Linearization - munication Instrumentation - Radar - Engineering Evaluation (/EM) Samples are Available(1) 3 Description The ADS5463 is a 12-bit, 500-MSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply, while providing LVDS-patible digital outputs from the 3.3-V supply. The ADS5463 input buffer isolates the internal switching of the onboard track and hold (T and H) from disturbing the signal source. An internal reference generator is also provided to simplify the system design further. The ADS5463 has outstanding low noise and linearity over input frequency. The ADS5463 is available in a 84-pin ceramic nonconductive tie-bar package (HFG). The ADS5463 is built on state-of-the-art Texas Instruments plementary bipolar process (Bi3X) and is specified over the full military temperature range (- 55°C to 125°C Tcase). Device Information(2) PART NUMBER PACKAGE BODY SIZE (NOM) CFP (84) 16.51 mm × 16.51 mm (1) These units are intended for engineering evaluation only. They are processed to a non-pliant flow (for example, no burn-in, and so forth) and are tested to temperature rating of 25°C only. These units are not suitable for...