| Part number | 74ACT11353 |
|---|---|
| Datasheet | 74ACT11353-etcTI.pdf |
| File Size | 88.68 KB |
| Manufacturer | Texas Instruments |
| Description | Dual 1-of-4 Data Selectors/Multiplexers |
|
|
Each of these data selectors/multiplexers contains inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate strobe inputs (G) are provided for each of the two four-line sections. With all but one of the mon outputs disabled (at a high-impedance state), the low-impedance of the single enabled output will drive the bus line to a high or low logic level.
See all Texas Instruments datasheets
| Part Number | Description |
|---|---|
| 74ACT11352 | DUAL 4-LINE TO 1-LINE DATA SELECTOR/MULTIPLEXER |
| 74ACT11373 | OCTAL TRANSPARENT D-TYPE LATCH |
| 74ACT11374 | OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP |
| 74ACT11377 | OCTAL D-TYPE FLIP-FLOP |
| 74ACT11378 | HEX D-TYPE FLIP FLOP |
| 74ACT11379 | QUAD D-TYPE FLIP FLOP |
| 74ACT11000 | QUADRUPLE 2-INPUT POSITIVE-NAND GATES |
| 74ACT11002 | QUADRUPLE 2-INPUT POSITIVE-NOR GATES |
| 74ACT11004 | HEX INVERTER |
| 74ACT11008 | QUADRUPLE 2-INPUT POSITIVE-AND GATE |
