Datasheet4U Logo Datasheet4U.com

AS5145 - 12-Bit Programmable Magnetic Rotary Encoder

Description

The AS5145 is a contact less magnetic rotary encoder for accurate angular measurement over a full turn of 360 degrees.

It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device.

Features

  • Contact less high resolution rotational position encoding over a full turn of 360 degrees Two digital 12 bit absolute outputs: - Serial interface - Pulse width modulated (PWM) output 3.

📥 Download Datasheet

Datasheet Details

Part number AS5145
Manufacturer austriamicrosystems AG
File Size 1.19 MB
Description 12-Bit Programmable Magnetic Rotary Encoder
Datasheet download datasheet AS5145 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS5145A 12-Bit Programmable Magnetic Rotary Encoder ams
AS5145B 12-Bit Programmable Magnetic Rotary Encoder ams
AS5145H 12-Bit Programmable Magnetic Rotary Encoder ams
AS5140H 10-Bit 360-o Programmable Magnetic Rotary Encoder ams
AS5147 14-Bit On-Axis Magnetic Rotary Position Sensor ams

Other Datasheets by austriamicrosystems AG

Part Number Description
AS5145A 12-Bit Programmable Magnetic Rotary Encoder
AS5145B 12-Bit Programmable Magnetic Rotary Encoder
AS5140H 10-Bit 360 Programmable Magnetic Rotary Encoder
AS5115 Programmable 360-o Magnetic Angle Encoder
AS5130 8 Bit Programmable Magnetic Rotary Encoder

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Data Sheet AS5145/AS5145A/AS5145B 1 2 - B i t P r o g r a m m a b l e M a g n etic R otary Enco der www.DataSheet4U.com 1 General Description The AS5145 is a contact less magnetic rotary encoder for accurate angular measurement over a full turn of 360 degrees. It is a system-on-chip, combining integrated Hall elements, analog front end and digital signal processing in a single device. To measure the angle, only a simple two-pole magnet, rotating over the center of the chip, is required. The magnet may be placed above or below the IC. The absolute angle measurement provides instant indication of the magnet’s angular position with a resolution of 0.0879º = 4096 positions per revolution. This digital data is available as a serial bit stream and as a PWM signal.
Published: |