Datasheet4U Logo Datasheet4U.com

AS2701A - AS-Interface Slave IC

Description

The signal transmission between the master and the slaves in the AS-Interface system is performed by a parallel two-line wire (AS-Interface line) to which the IC is connected only via a polarity protection diode and a suppressor diode.

Features

  • Simple two-wire bus (AS-Interface line) Transmission of both power and signal on the AS-Interface line Decoupling of power and signal by the IC without additional external devices Transmitting protocol for using the IC and the AS-Interface master in the transmit/receive modes Switching of max. 31 AS-Interface slave ICs on one bus possible Power supply of peripheral devices from the AS-Interface sl.

📥 Download Datasheet

Datasheet Details

Part number AS2701A
Manufacturer austriamicrosystems AG
File Size 180.84 KB
Description AS-Interface Slave IC
Datasheet download datasheet AS2701A Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
AS2701 700mA Low Dropout Voltage Regulators Sipex
AS2700 700mA Low Dropout Voltage Regulators Sipex
AS2702 700mA Low Dropout Voltage Regulators Sipex
AS273 MCU 8-bit microcontroller Aschip
AS27C010A 1 MEG UVEPROM UV Erasable Programmable Read-Only Memory Austin Semiconductor

Other Datasheets by austriamicrosystems AG

Part Number Description
AS2702 AS-Interface Slave IC
AS2504 Cordless telephone / answering machine line interface
AS2507 SINGLE CHIP 2-WIRE INTERCOM CMOS INTEGRATED CIRCUIT
AS2520 Telephone Speech Circuit with Loudhearing and Handsfree
AS2520B Telephone Speech Circuit with Loudhearing and Handsfree

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
AS2701A (ISA3+) AS-Interface Slave IC Data Sheet Rev. C, October 2000 AS-Interface Slave IC AS2701A (ISA3+) Key Features • • • • • • • • • • Simple two-wire bus (AS-Interface line) Transmission of both power and signal on the AS-Interface line Decoupling of power and signal by the IC without additional external devices Transmitting protocol for using the IC and the AS-Interface master in the transmit/receive modes Switching of max. 31 AS-Interface slave ICs on one bus possible Power supply of peripheral devices from the AS-Interface slave IC of up to 35mA@24V Only few external devices necessary for operation (quartz, 4 capacitors, E2PROM) Storing of the configuration data and the slave address in one E2PROM Quartz oscillator for 5.
Published: |