Datasheet4U Logo Datasheet4U.com

apm8142 - BT2.0+EDR HCI Module

General Description

With the on- chip CSR Bluetooth software stack it provides a fully compliant Bluetooth system to v2.0+EDR of the specification for data and voice communications.

Key Features

  • y Enhanced Data Rate(EDR) compliant with v2.0 of specification for both 2Mbps and 3Mbps modulation modes y Fully Qualified Bluetooth v2.0+EDR system y Small footprint: 6.8×6×1.35mm LGA package y Full Speed Bluetooth Operation with Full Pico-net Support y Scatter-net Support y Ultra low power consumption y Excellent Compatibility with Cellular Telephones y USB and UART Port to 3Mbits/s y Support for 802.11 two wire & three wire co-existence A.

📥 Download Datasheet

Datasheet Details

Part number apm8142
Manufacturer apm
File Size 294.43 KB
Description BT2.0+EDR HCI Module
Datasheet download datasheet apm8142 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
APM81803 Synchronous Buck Regulator Allegro
APM81911 Synchronous Buck Regulator Allegro
APM8001K Dual N-Channel MOSFET Anpec Electronics Coropration
APM80900 1.5A PWM Dimmable Synchronous Buck LED Module Allegro
APM80904 1.5A PWM Dimmable Synchronous Buck LED Module Allegro

Other Datasheets by apm

Part Number Description
apm8262 Bluetooth Audio Module
apm8282 Bluetooth Audio Module
apm8811 BT4.0 Dual Module
apm1010 BT4.0 Single Mode Module
apm1688 802.11b/g/n WiFi Module

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
apm8142 BT2.0+EDR HCI Module apm8142 BT2.0+EDR HCI Module Pre-production Information DESCRIPTION With the on- chip CSR Bluetooth software stack it provides a fully compliant Bluetooth system to v2.0+EDR of the specification for data and voice communications. The device incorporates auto -calibration and built in self test (BIST) routines to simplify development, type approval and production test. The pre-tested module eliminates the need to create custom designs, resulting in greatly reduced development risk, costs and time-to-market. FEATURES y Enhanced Data Rate(EDR) compliant with v2.0 of specification for both 2Mbps and 3Mbps modulation modes y Fully Qualified Bluetooth v2.0+EDR system y Small footprint: 6.8×6×1.