Datasheet4U Logo Datasheet4U.com

ZNBG6001 - FET BIAS CONTROLLER

General Description

The ZNBG series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR, cellular telephones etc.

with a minimum of external components.

📥 Download Datasheet

Full PDF Text Transcription for ZNBG6001 (Reference)

Note: Below is a high-fidelity text extraction (approx. 800 characters) for ZNBG6001. For precise diagrams, and layout, please refer to the original PDF.

FET BIAS CONTROLLER ISSUE 2 - JUNE 1998 DEVICE DESCRIPTION The ZNBG series of devices are designed to meet the bias requirements of GaAs and HEMT FETs commonly used in sa...

View more extracted text
o meet the bias requirements of GaAs and HEMT FETs commonly used in satellite receiver LNBs, PMR, cellular telephones etc. with a minimum of external components. With the addition of two capacitors and resistors the devices provide drain voltage and current control for a number of external grounded source FETs, generating the regulated negative rail required for FET gate biasing whilst operating from a single supply. This negative bias, at -3 volts, can also be used to supply other external circuits. The ZNBG4000/1 and ZNBG6000/1 contain four and six bias stages respectively.

More Datasheets from Zetex (now Diodes Incorporated)

Part Number Description
ZNBG6000 FET BIAS CONTROLLER
ZNBG2000 FET BIAS CONTROLLER
ZNBG2000X10 FET BIAS CONTROLLER
ZNBG2001 FET BIAS CONTROLLER
ZNBG2001X10 FET BIAS CONTROLLER
ZNBG3000 FET BIAS CONTROLLER
ZNBG3000Q16 FET BIAS CONTROLLER
ZNBG3001 FET BIAS CONTROLLER
ZNBG3001Q16 FET BIAS CONTROLLER
ZNBG3010 FET BIAS CONTROLLER AND POLARITY SWITCH