Datasheet4U Logo Datasheet4U.com

SP5730 - 1.3 GHz Low Phase Noise Frequency Synthesiser

General Description

The SP5730 is a single chip frequency synthesiser designed for tuning systems up to 1

3GHz and is optimised for digital terrestrial applications.

Key Features

  • Complete 1.
  • 3 GHz Single Chip System for Digital Terrestrial Television.

📥 Download Datasheet

Datasheet Details

Part number SP5730
Manufacturer Zarlink Semiconductor
File Size 380.17 KB
Description 1.3 GHz Low Phase Noise Frequency Synthesiser
Datasheet download datasheet SP5730 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SP5730 1.3GHz Low Phase Noise Frequency Synthesiser Mitel Networks
SP5718AP High precision primary side feedback switching power supply chip Shenchuanghui Electronics
SP5748 2.4GHz Very Low Phase Noise PLL Mitel Networks
SP574B 12-Bit Sampling A/D Converters Sipex
SP5769 3GHz I2C Bus Synthesiser Mitel Networks

Other Datasheets by Zarlink Semiconductor

Part Number Description
SP5024 3-Wire Bus Controlled Synthesiser
SP5026 1.0GHz 3-Wire Bus Controlled Synthesizer
SP5511 Bidirectional I2C Bus 4-Address Synthesiser
SP5610 1.3GHz BI-DIRECTIONAL I2C BUS CONTROLLED SYNTHESISER
SP5848 3-Wire Bus Dual Low Phase Noise PLL

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SP5730 1.3 GHz Low Phase Noise Frequency Synthesiser Data Sheet November 2004 Features • Complete 1·3 GHz Single Chip System for Digital Terrestrial Television Applications • Selectable Reference Division Ratio, Compatible with DTT Requirements • Optimised for Low Phase Noise, with Comparison Frequencies up to 4 MHz • No RF Prescaler • Selectable Reference/Comparison Frequency Output • Four Selectable I2C Addresses • I2C Fast Mode Compliant with 3·3V and 5V Logic Levels • Four Switching Ports • Functional Replacement for SP5659 (except ADC) • Pin Compatible with SP5655 • Power Consumption 120mW with VCC = 5·5V, all Ports off • ESD Protection 2kV min., MIL-STD-883B Method 3015 Cat.