W29F102 Datasheet | Winbond

W29F102 64K × 16 CMOS FLASH MEMORY GENERAL DESCRIPTION The W29F102 is a 1-megabit, 5-volt only CMOS flash memory organized as 64K × 16 bits. The device can be programmed and erased in-system with a standard 5V power supply. A 12-volt VPP is not required. The unique cell architecture of the W29F102 results in fast program/erase operations with extremely low current consumption (pared to other parable 5-volt flash memory products). The device can also be programmed and erased using standard EPROM programmers. Features - Single 5-volt operations: - 5-volt Read - 5-volt Erase - 5-volt Program - Low power consumption - Active current: 25 m A (typ.) - Standby current: 20 µA (typ.) - - - Fast Program operation: - Word-by-Word programming: 50 µS (max.) Fast Erase operation: 100 m S (typ.) Fast Read access time: 45/50/55/70 n S Endurance: 1K/10K cycles (typ.) Ten-year data retention Hardware data protection 8K word Boot Block with Lockout protection - - - - Automatic program and erase timing with internal VPP generation End of program or erase detection - Toggle bit - Data polling Latched address and data TTL patible I/O JEDEC standard word-wide pinouts Available packages: 40-pin TSOP and 44-pin PLCC - - - - - - -1- Publication Release Date: June 1999 Revision A4 Free Datasheet http://../ PIN CONFIGURATIONS BLOCK DIAGRAM A9 A10 A11 A12 A13 A14 A15 NC WE VDD NC CE DQ15 DQ14 DQ13 DQ12 DQ11 DQ10 DQ9 DQ8 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 40 39 38 37 36 35 34 33 40-pin TSOP 32 31 30 29 28 27 26 25 24 23 22...