Datasheet4U Logo Datasheet4U.com

WAS4732D - MIC/GND Cross-point Switch

Description

The WAS4732D is a 2x2 cross-point switch that is used to interchange the Ground and MIC connections on a headphone connector.

The Ground switch has an ultra-low Ron of 0.1 Ω (typical) to minimize voltage drop across it, preventing undesired increase in headphone ground reference voltage.

Features

  • Supply voltage : 2.3 ~ 5.0V.
  • ultra-low Ron for GND Switch : 100mΩ.
  • low Ron for MIC Switch : 4.5 Ω.
  • Break-Before-Make Switching.
  • Low quiescent current over an Expanded Co.

📥 Download Datasheet

Datasheet Details

Part number WAS4732D
Manufacturer WillSEMI
File Size 168.89 KB
Description MIC/GND Cross-point Switch
Datasheet download datasheet WAS4732D Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
WAS175M12BM3 Silicon Carbide Half-Bridge Module Wolfspeed
WAS175M12BM3T Silicon Carbide Half-Bridge Module Wolfspeed
WAS300M12BM2 All-Silicon Carbide THB-80 Half-Bridge Module Cree
WAS310M17BM3 Half-Bridge Module Wolfspeed
WAS310M17BM3T Half-Bridge Module Wolfspeed

Other Datasheets by WillSEMI

Part Number Description
WAS4731Q 3:1 High speed Switch
WAS4735Q 4:1 High speed Switch
WAS4736 MIC/GND Cross-point Switch
WAS4717Q Dual SPDT Analog Switch
WAS4723Q SPDT Analog Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
WAS4732D WAS4732D MIC/GND Cross-point Switch for EU/US Headphone Compatible Application http://www.sh-willsemi.com Descriptions The WAS4732D is a 2x2 cross-point switch that is used to interchange the Ground and MIC connections on a headphone connector. The Ground switch has an ultra-low Ron of 0.1 Ω (typical) to minimize voltage drop across it, preventing undesired increase in headphone ground reference voltage. the switch state is controlled via the SEL input. When SEL=High, GND is connected to COM2 and MIC is connected to COM1; When SEL=Low, GND is connected to COM1 and MIC is connected to COM2. An internal pull-down 2MΩ resistor on SEL input sets the default state of the switch. The WAS4732D is available in DFN2x2-6L package. Standard product is Pb-Free and halogen-Free.
Published: |