Datasheet4U Logo Datasheet4U.com

LH1512BAC - C Solid-State Relay

Description

The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay.

The relays are constructed as a mult.-chip hybrid device.

Actuation control is via an infrared LED.

Features

  • Current limit protection.
  • Isolation test voltage 3750 VRMS.
  • Typical RON 10 Ω.
  • Load voltage 200 V.
  • Load current 200 mA.
  • High surge capability.
  • Clean bounce free switching.
  • Low power consumption.
  • SMD lead available on tape and reel.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912.

📥 Download Datasheet

Datasheet preview – LH1512BAC

Datasheet Details

Part number LH1512BAC
Manufacturer Vishay Siliconix
File Size 228.56 KB
Description C Solid-State Relay
Datasheet download datasheet LH1512BAC Datasheet
Additional preview pages of the LH1512BAC datasheet.

📁 Similar Datasheet

  • LH1512AB - (LH15xx) 1 Form Relays (AT&T)
  • LH1510 - High Voltage Optically Coupled Solid (Siemens)
  • LH1511 - (LH15xx) 1 Form B (Siemens Semiconductor)
  • LH1514 - 80 OUTPUT LCD SEGMENT DRIVER (Sharp Electrionic Components)
  • LH1514AF - 80 OUTPUT LCD SEGMENT DRIVER (Sharp Electrionic Components)
  • LH1516 - HIGH VOLTAGE/ PHOTO MOS RELAY (ETC)
  • LH1516 - High Voltage Optically Coupled Solid (Siemens)
  • LH1516A - HIGH VOLTAGE/ PHOTO MOS RELAY (ETC)
  • LH1517 - High Voltage Optically Coupled Solid (Siemens)
  • LH1518 - High Voltage Optically Coupled Solid (Siemens)
Other Datasheets by Vishay Siliconix

Full PDF Text Transcription

Click to expand full text
www.vishay.com LH1512BAC, LH1512BACTR, LH1512BB Vishay Semiconductors Dual 1 Form A/B, C Solid-State Relay DIP SMD S1 S1' S2 S2' S1 S1' S2 S2' 8 76 5 i179034_2 1 2 3 4 LINKS TO ADDITIONAL RESOURCES Design Tools 3D 3D 3D Models Models DESCRIPTION The LH1512 relays contain normally open and normally closed switches that can be used independently as a 1 form A and 1 form B relay, or when used together, as a 1 form C relay. The relays are constructed as a mult.-chip hybrid device. Actuation control is via an infrared LED. The output switch is a combination of a photodiode array with MOSFET switches and control circuity.
Published: |