Datasheet4U Logo Datasheet4U.com

IL300 - Linear Optocoupler

Description

The IL300 linear optocoupler consists of an AlGaAs infrared emitter irradiating an output PIN photodiode and a feedback photodiode.

Features

  • Couples AC and DC signals.
  • High gain stability, ± 0.005 %/°C typically.
  • Low input-output capacitance.
  • Isolation rated voltage 4420 VRMS.
  • Internal insulation distance, > 0.4 mm.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912.

📥 Download Datasheet

Datasheet Details

Part number IL300
Manufacturer Vishay
File Size 203.32 KB
Description Linear Optocoupler
Datasheet download datasheet IL300 Datasheet

📁 Similar Datasheet

  • IL300 - LINEAR OPTOCOUPLER (Siemens Semiconductor Group)
  • IL30 - PHOTODARLINGTON OPTOCOUPLER (Siemens Semiconductor Group)
  • IL30 - Optocoupler (Vishay)
  • IL31 - PHOTODARLINGTON OPTOCOUPLER (Siemens Semiconductor Group)
  • IL311 - Voltage Comparator (IK Semiconductor)
  • IL317 - 1.5A Adjustable Output Positive Voltage Regulator (IK Semiconductor)
  • IL317 - THREE-TERMINAL ADJUSTABLE OUTPUT POSITIVE VOLTAGE REGULATORS (Integral)
  • IL317L - 100mA Adjustable Output Positive Voltage Regulator (IK Semiconductor)
  • IL3222 - (IL3222 / IL3285) Fractional Load RS485 and RS422 Transceivers (NVE)
  • IL324 - Low Power Quad Operational Amplifier (ETC)
Other Datasheets by Vishay Siliconix
  • IL388 - Linear Optocoupler/ PCMCIA package
  • IL388 - Linear Optocoupler/ PCMCIA package
  • IL388DAA - Linear Optocoupler/ PCMCIA package

Full PDF Text Transcription

Click to expand full text
www.vishay.com IL300 Vishay Semiconductors Linear Optocoupler, High Gain Stability, Wide Bandwidth C1 8 NC A2 7 NC K1 K2 C3 6C A4 5A DVE LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models Related Documents Models Footprints Schematics DESCRIPTION The IL300 linear optocoupler consists of an AlGaAs infrared emitter irradiating an output PIN photodiode and a feedback photodiode. The feedback photodiode captures a percentage of the emitter’s flux and generates a control signal (IP1) that can be used to keep the emitter output constant by adjusting the emitter forward current. This compensates for the emitter’s non-linear, time, and temperature characteristics.
Published: |