IHD1EB153L
FEATURES
- Printed circuit mounting (axial leads)
- Protected by polyolefin tubing Ro HS
- High saturation bobbin used allowing high PLIANT inductance with low DC resistance
- Pre-tinned leads
- High resistivity core offers very high parallel resistance, resulting in maximum coil performance
- 20 sleeveless models available at reduced cost
ELECTRICAL SPECIFICATIONS
Inductance: Measured at 1.0 V with no DC current Incremental Current: The typical current at which the inductance will be decreased by 5 % from its initial zero DC value Dielectric Rating: 2500 VRMS between winding and outer circumference to within 0.250" [6.35 mm] of the insulating sleeve edge Operating Temperature:
- 55 °C to + 125 °C (no load)
- 55 °C to + 85 °C (at full rated current) Current Rating: Maximum continuous Operating current (DC or RMS) based on a 40 °C temperature rise
MECHANICAL SPECIFICATIONS
Wire: Solid soft copper Terminals: 20 AWG tinned copper leads Coating: Polyolefin tubing
- flame retardant UL...
