Datasheet4U Logo Datasheet4U.com

TSOP57338H - IR Receiver

Download the TSOP57338H datasheet PDF. This datasheet also covers the TSOP57336H variant, as both devices belong to the same ir receiver family and are provided as variant models within a single manufacturer datasheet.

Description

This IR receiver series is optimized for short burst remote control systems in different environments.

The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application.

Features

  • Individual IC settings to reach maximum performance.
  • Immunity against noise (lamps, LCD TV, Wi-Fi).
  • Low supply current.
  • Photo detector and preamplifier in one package.
  • Supply voltage: 2.0 V to 5.5 V.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TSOP57336H-Vishay.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
TSOP5700 IR Receiver for High Data Rate PCM at 455 kHz Vishay Siliconix
TSOP5230 Photo Module for High Data Rates PCM Remote Control Vishay Telefunken
TSOP5233 Photo Module for High Data Rates PCM Remote Control Vishay Telefunken
TSOP5236 Photo Module for High Data Rates PCM Remote Control Vishay Telefunken
TSOP5237 Photo Module for High Data Rates PCM Remote Control Vishay Telefunken

Other Datasheets by Vishay

Part Number Description
TSOP57338 IR Receiver Modules
TSOP57336 IR Receiver Modules
TSOP57336H IR Receiver
TSOP57340 IR Receiver Modules
TSOP57340H IR Receiver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Datasheet Values Refer to PCN-OPT-1224-2022 www.vishay.com TSOP573..H, TSOP575..H Vishay Semiconductors IR Receiver Modules for Remote Control Systems DESCRIPTION This IR receiver series is optimized for short burst remote control systems in different environments. The customer can chose between different IC settings (AGC variants), to find the optimum solution for his application. The higher the AGC, the better noise is suppressed, but the lower the code compatibility. The devices contain a PIN diode and a preamplifier assembled on a lead frame. The epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. These components have not been qualified to automotive specifications.