TSMP77138 - 1IR Receiver

Description

The TSMP77138 series are miniaturized SMD IR receiver modules for infrared remote control systems.

Two PIN diodes and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter.

Features

Two lenses for high sensitivity and wide receiving angle.
AC coupled response from 30 kHz to 55 kHz, all data formats.
If the IR signal strength is less then 0.5 W/m2 (distance more than 0.5 m with a typical IR remote control), the frequency range is up to 60 kHz.
Improved shielding against electrical field disturbance.
AGC to suppress ambient noise.
High sensitivity, long receiving range.
Supply voltage: 2.5 V to 5.5 V.
Ca.

Vishay

📥 Download Datasheet

Datasheet Details

Part number	TSMP77138
Manufacturer	Vishay
File Size	390.69 KB
Description	1IR Receiver
Datasheet	TSMP77138 Datasheet

📁 Similar Datasheet

TSM-102-01-S-SV - TSM Series / Terminal Strips (Samtec)
TSM-105-01-S-DV - SQ POST HEADER (Samtec)
TSM-105-01-xxx - Terminal Strips (Samtec)
TSM-108-xx - TERMINAL STRIPS (Samtec)
TSM-1250 - Single Point (TRANSCELL)
TSM-3E20 - VCSEL (ETC)
TSM006 - Primary PWM Controller (ST Microelectronics)
TSM007 - Primary PWM Controller (ST Microelectronics)
TSM018NA03CR - N-Channel Power MOSFET (Taiwan Semiconductor)
TSM025NB04LCR - N-Channel Power MOSFET (Taiwan Semiconductor)

Other Datasheets by Vishay

TSMP77000 - IR Sensor
TSMP1138 - IR Sensor
TSMP4138 - IR Sensor
TSMP58000 - IR Sensor
TSMP58138 - IR Sensor
TSMP6000 - IR Sensor
TSMP95000 - IR Sensor
TSMP95100XV - IR Receiver

Full PDF Text Transcription

Click to expand full text

End of Life May-2023 - Alternative Device: TSMP95100 www.vishay.com TSMP77138 Vishay Semiconductors 1IR Receiver Modules for Remote Control Systems 20953 LINKS TO ADDITIONAL RESOURCES Product Page 3D 3D 3D Models Calculators Marking DESCRIPTION The TSMP77138 series are miniaturized SMD IR receiver modules for infrared remote control systems. Two PIN diodes and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter. The modulated output signal, carrier out, can be used for repeater applications and code learning applications. These components have not been qualified according to automotive specifications.

Published: Sep 1, 2023 |