Datasheet4U Logo Datasheet4U.com

TDP1403 - Dale Thin Film

Download the TDP1403 datasheet PDF. This datasheet also covers the TDP16030 variant, as both devices belong to the same dale thin film family and are provided as variant models within a single manufacturer datasheet.

Features

  • Standard rugged, molded case construction (14 pins and 16 pins).
  • Highly stable thin film (500 ppm at +70 °C at 2000 h).
  • Low temperature coefficient (± 25 ppm/°C) Available Available.
  • Compatible with automatic insertion equipment.
  • Standard isolated pin one common schematic.
  • Isolated and bussed schematics.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912 Note.
  • This datasheet provi.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TDP16030-Vishay.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number TDP1403
Manufacturer Vishay
File Size 86.41 KB
Description Dale Thin Film
Datasheet download datasheet TDP1403 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TDP1204 2.1 Level Shifter Hybrid Redriver Texas Instruments
TDP158 AC-Coupled to TMDS or HDMI Redriver Texas Instruments
TDP-112-75 Diplexer Mini-Circuits
TDP-SW80 Data Projector Toshiba
TDP-SW80 Data Projector Toshiba

Other Datasheets by Vishay

Part Number Description
TDP1401 Dale Thin Film
TDP1601 Dale Thin Film
TDP1603 Dale Thin Film

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.vishay.com TDP Vishay Dale Thin Film Molded, Dual-In-Line Thin Film Resistor, Through-Hole Network Actual Size Vishay Dale Thin Film offers two standard circuits in a 14 pins and 16 pins molded dual-in-line over a 100 Ω to 100 kΩ resistance range. The networks feature ratio tolerance to 0.05 % with a TCR tracking of 5 ppm/°C. SCHEMATIC Schematic TDP01 FEATURES • Standard rugged, molded case construction (14 pins and 16 pins) • Highly stable thin film (500 ppm at +70 °C at 2000 h) • Low temperature coefficient (± 25 ppm/°C) Available Available • Compatible with automatic insertion equipment • Standard isolated pin one common schematic • Isolated and bussed schematics • Material categorization: for definitions of compliance please see www.vishay.
Published: |