SMC3K40CA Datasheet | Vishay

FEATURES - Available in bi-directional polarity only - 3000 W peak pulse power capability with a (10/1000 μs) waveform - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - Not remended for PCB bottom side wave mounting - AEC-Q101 qualified - pliant to Ro HS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC - Halogen-free according to IEC 61249-2-21 definition 3000 W 150 °C DO-214AB (SMC) PRIMARY CHARACTERISTICS VWM PPPM TJ max. 22 V to 78 V MECHANICAL DATA Case: DO-214AB (SMC) Molding pound meets UL 94 V-0 flammability rating Base P/N-M3 - halogen-free, Ro HS pliant, and mercial grade Base P/NHM3 - halogen-free, Ro HS pliant, and AEC-Q101 qualified http://..net/ TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, automotive and telemunication. Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 M3 suffix meets JESD 201 class 1A whisker test, HM3 suffix meets JESD 201 class 2 whisker test Polarity: no marking on bi-directional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform Peak pulse current with a 10/1000 μs waveform Operating junction and storage temperature range Note (1) Non-repetitive current pulse and derated above T = 25 °C A SYMBOL PPPM (1) IPPM (1) VALUE 3000 See next table - 55 to + 150 UNIT W A °C TJ, TSTG Document Number: 89433 Revision: 18-May-11 For technical questions within your region, please contact one of the following: .vishay. Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 datasheet...