SMA6J11A Datasheet | Vishay

FEATURES - Low profile package - Ideal for automated placement - Available in unidirectional polarity only - Excellent clamping capability - Meets MSL level 1, per J-STD-020, LF maximum peak of 260 °C - Material categorization: for definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, automotive, and telemunication. MECHANICAL DATA Case: SMA (DO-214AC) Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS-pliant and mercial grade Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 2 whisker test Polarity: color band denotes cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Peak pulse power dissipation with a 10/1000 μs waveform (1)(2) Peak pulse power dissipation with a 8/20 μs waveform PPPM Peak pulse current with a 10/1000 μs waveform (1)(2) IPPM Peak pulse current with a 8/20 μs waveform Power dissipation on infinite heatsink, TA = 50 °C Peak forward surge current 8.3 ms single half sine-wave IFSM Operating junction and storage temperature range TJ, TSTG Notes (1) Non-repetitive current pulse, per fig. 1 and derated above TA = 25 °C per fig. 2 (2) Mounted on PCB with 0.2" x 0.2" (5.0 mm x 5.0 mm) copper pads to each terminal VALUE 600 4000 See next table 4.0 50 -55 to +150 UNIT W A W A °C Revision: 17-Sep-2021 Document Number: 89115 For technical questions within your region: Diodes Americas@vishay., Diodes Asia@vishay., Diodes Europe@vishay. THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000 .vishay. INDEX OF SYMBOLS SYMBOL PARAMETER VWM VBR VC ID IPP...