Datasheet4U Logo Datasheet4U.com

SFH620AGB - Optocoupler

Download the SFH620AGB datasheet PDF. This datasheet also covers the SFH620AA variant, as both devices belong to the same optocoupler family and are provided as variant models within a single manufacturer datasheet.

General Description

The SFH620AA, SFH620AGB

Key Features

  • a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulat.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SFH620AA-Vishay.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
SFH620AGB 5.3 kV TRIOS Optocoupler Siemens Semiconductor Group
SFH620A 5.3 kV TRIOS OPTOCOUPLER Siemens Semiconductor Group
SFH620A Optocoupler Vishay Siliconix
SFH620A-1 Optocouplers Infineon Technologies AG
SFH620A-2 Optocouplers Infineon Technologies AG

Other Datasheets by Vishay

Part Number Description
SFH620AA Optocoupler
SFH600 Optocoupler
SFH600-0 Optocoupler
SFH600-0X007 Optocoupler
SFH600-1 Optocoupler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.vishay.com SFH620AA, SFH620AGB Vishay Semiconductors Optocoupler, Phototransistor Output, AC Input, 5300 VRMS A/C 1 C/A 2 4C 3E i179062-1 DESCRIPTION The SFH620AA, SFH620AGB features a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a plastic DIP-4 package. The coupling devices are designed for signal transmission between two electrically separated circuits. The couplers are end-stackable with 2.54 mm lead spacing. This version complies with IEC 60950 (DIN VDE 0805) for reinforced insulation up to an operation voltage of 400 VRMS or DC.