Datasheet4U Logo Datasheet4U.com

PR01 - Power Metal Film Leaded Resistors

Download the PR01 datasheet PDF. This datasheet also covers the PR02 variant, as both devices belong to the same power metal film leaded resistors family and are provided as variant models within a single manufacturer datasheet.

General Description

A homogeneous film of metal alloy is deposited on a high grade ceramic body.

After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps.

Key Features

  • High power in small packages (1 W / 0207 size to 3 W / 0617 size).
  • Meets active and passive flammability requirements as defined in IEC 60115-1.
  • Flameproof insulation coating meets UL 94 V-0 requirements.
  • Defined fusing characteristics.
  • Technology: metal film.
  • AEC-Q200 qualified.
  • Material categorization: for definitions of compliance please see www. vishay. com/doc?99912.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (PR02-Vishay.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number PR01
Manufacturer Vishay
File Size 213.15 KB
Description Power Metal Film Leaded Resistors
Datasheet download datasheet PR01 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer

Other Datasheets by Vishay

Part Number Description
PR02 Power Metal Film Leaded Resistors
PR03 Power Metal Film Leaded Resistors

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
www.vishay.com PR01, PR02, PR03 Vishay BCcomponents Power Metal Film Leaded Resistors LINKS TO ADDITIONAL RESOURCES 3D 3D 3D Models DESCRIPTION A homogeneous film of metal alloy is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive layer, tinned connecting wires of electrolytic copper or copper-clad iron are welded to the end-caps. The resistors are coated with a red, non-flammable lacquer which provides electrical, mechanical and climatic protection. This coating is not resistant to aggressive fluxes and cleaning solvents. The encapsulation is resistant to all cleaning solvents in accordance with IEC 60068-2-45.