900,000+ datasheet pdf search and download

Datasheet4U offers most rated semiconductors data sheet pdf




Vishay Intertechnology Electronic Components Datasheet

PFRR1206 Datasheet

Thin Film Chip Resistors

No Preview Available !

www.vishay.com
PFRR
Vishay
ESCC ( ) 4001/023 Qualified R Failure Rate High Precision
(10 ppm/°C, 0.05 %) Thin Film Chip Resistors
Vishay Sfernice Thin Film division holds ESCC QML
qualification (ESCC technology flow qualification).
These HiRel components are ideal for low noise and
precision applications, superior stability, low temperature
coefficient of resistance, and low voltage coefficient, Vishay
Sfernice’s precision thin film wraparound resistors exceed
requirements of MIL-PRF-55342G characteristics Y
(± 10 ppm/°C).
FEATURES
• Load life stability at ± 70 °C for 2000 h: 0.25 %
under Pn
• Temperature coefficient to: 10 ppm/°C
• Very low noise (< -35 dB) and voltage coefficient
(< 0.01 ppm/V)
• Resistance range: 100 to 3.01 M(depending on size)
• Tolerances down to 0.05 %
• SnPb terminations over nickel barrier
• ESCC 4001 (generic specification)
• ESCC 4001/023 (detail specification)
• ESCC qualified
• R failure rate (0.01 % per 1000 h)
• SMD wraparound chip resistor
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
SIZE
ESCC
VARIANT
NUMBER
RESISTANCE
RANGE
RATED
POWER
AT + 70 °C
(Pn)
W
PFRR 0402 0402
15
100 to 150K
0.05
PFRR 0603 0603
09
100 to 500K
0.1
PFRR 0805 0805
10
100 to 750K
0.125
PFRR 1206 1206
11
100 to 3.5M
0.25
PFRR 2010 2010
12
100 to 6M
0.50
LIMITING
ELEMENT
VOLTAGE
(UL)
V
30
50
100
150
200
INSULATION
VOLTAGE
(Ui)
V
40
100
200
300
300
TOLERANCE
±%
0.05, 0.1
0.05, 0.1
0.05, 0.1
0.05, 0.1
0.05, 0.1
TEMPERATURE
COEFFICIENT
± ppm/°C
10, 25
10, 25
10, 25
10, 25
10, 25
CLIMATIC SPECIFICATIONS
Operating temperature
range
-55 °C; +155 °C
Soldering temperature
(Tsol)
260 °C, immersion 10 s
MECHANICAL SPECIFICATIONS
Substrate material Alumina
Technology
Thin Film
Film
Nickel Chromium
with mineral passivation
Protection
Epoxy and Silicon
Terminations
B type: SnPb over nickel barrier
for solder reflow
QUALIFIED OHMIC RANGE: MAX. VALUE
PFRR0402
PFRR0603
100 k
261 k
PFRR0805
301 k
PFRR1206
1 M
PFRR2010
3.01 M
Revision: 19-Nov-14
1 Document Number: 53046
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Vishay Intertechnology Electronic Components Datasheet

PFRR1206 Datasheet

Thin Film Chip Resistors

No Preview Available !

www.vishay.com
PFRR
Vishay
DIMENSIONS in millimeters
A
D
D
C
VARIANT
NUMBER
09
10
11
12
15
STYLE
0603
0805
1206
2010
0402
E
A
Min.
Max.
1.39 2.16
1.78 2.55
2.87 3.64
4.95 5.72
0.87 1.64
E
B
Min.
Max.
0.62 1.01
1.14 1.53
1.47 1.86
2.41 2.8
0.47 0.86
C
Min.
Max.
0.25 1.02
0.25 1.02
0.25 1.02
0.25 1.02
0.25 1.02
LAND PATTERN DIMENSIONS in millimeters
Gmin.
B
D
Min.
Max.
0.17 0.51
0.17 0.51
0.17 0.51
0.35 0.85
0.09 0.38
E
Min.
Max.
0.25 0.51
0.25 0.51
0.25 0.51
0.35 0.85
0.12 0.38
Zmax.
CHIP SIZE
0402
Zmax.
1.55
0603
2.37
0705/0805
1206
2.76
3.91
2010
5.93
Note
• Suggested land pattern: According to IPC-7351
Gmin.
0.15
0.35
0.74
1.85
3.71
Xmax.
0.73
0.98
1.40
1.73
2.67
TRACEABILITY DEFINITIONS
The two major traceability elements are defined as:
• The primary process lot number named Front End lot (FE lot). One “FE lot”is composed of several wafers issued from the
same thin film deposition sequence.
• The date code named Batch Number(BN). The “BN” is defined after completion of the end of production testing sequence.
The lot homogeneity is given by the “FE lot” and not by the “BN”.
According to the applied rules validated by the ESCC through the product qualification, the following situations are agreed:
• Parts coming from different “FE lost” might have the same “BN”.
• A maximum of two different “BN” might be applied to the same “FE lot” to enable the use of overruns from a previous PO.
• Unless requested / approved by the customer the “BN” will be 2 years old maximum.
SPECIFIC TRACEABILITY REQUIREMENTS
The following specific requirements have to be treated as:
• A customer who requires “Lot Homogeneity” has to mention it on the PO as “SINGLE PRODUCTION LOT”.
• A customer who requires “Lot Homogeneity” in addition to a “Single Batch Number” has to mention it on the PO as “SINGLE
PRODUCTION LOT AND OPTION R0101”.
END OF PRODUCTION TESTING
Mandatory testing performed at the end of the production process:
• 100 % overload: Voltage 6.25 Pn x Rnor 2 UL whichever is less - duration 2 s
Revision: 19-Nov-14
2 Document Number: 53046
For technical questions, contact: sferthinfilm@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000


Part Number PFRR1206
Description Thin Film Chip Resistors
Maker Vishay
Total Page 6 Pages
PDF Download

PFRR1206 Datasheet PDF

View PDF for Mobile








Similar Datasheet

1 PFRR1206 Thin Film Chip Resistors
Vishay





Part Number Start With

0    1    2    3    4    5    6    7    8    9    A    B    C    D    E    F    G    H    I    J    K    L    M    N    O    P    Q    R    S    T    U    V    W    X    Y    Z

Site map

Webmaste! click here

Contact us

Buy Components

Privacy Policy