P6KE350A Datasheet | Vishay

FEATURES - Glass passivated chip junction - Available in unidirectional and bidirectional - 600 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % - Excellent clamping capability - Very fast response time - Low incremental surge resistance - Solder dip 275 °C max. 10 s, per JESD 22-B106 - AEC-Q101 qualified - Material categorization: for definitions of pliance please see .vishay./doc?99912 TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, automotive, and telemunication. MECHANICAL DATA Case: DO-15 (DO-204AC) Molded epoxy over passivated chip Molding pound meets UL 94 V-0 flammability rating Base P/N-E3 - Ro HS pliant, mercial grade Base P/NHE3 - Ro HS pliant, AEC-Q101 qualified Terminals: matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test Note - P6KE250A to P6KE540A and P6KE250CA to P6KE440CA for mercial grade only Polarity: for unidirectional types the color band denotes cathode end, no marking on bidirectional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) Peak pulse current with a 10/1000 μs waveform (1) Power dissipation on infinite heatsink at TL = 75 °C (fig. 5) Peak forward surge current 8.3 ms single half sine-wave (2) Maximum instantaneous forward voltage at 50 A for unidirectional only (3) Operating junction and storage temperature range SYMBOL PPPM IPPM PD IFSM VF TJ, TSTG VALUE 600 See next table 5.0 100 3.5/5.0 -55 to +175 Notes (1) Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2 (2) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum (3) VF = 3.5 V for...