ILQ1615
ILQ1615 is Optocoupler manufactured by Vishay.
DESCRIPTION
The ILD1615, ILQ1615 are multi-channel 110 °C rated phototransistor optocouplers that use Ga As IRLED emitters and high gain NPN phototransistors. These devices are constructed using over/under leadframe optical coupling and double molded insulation technology resulting a withstand test voltage of 7500 VAC PEAK and a working voltage of 1700 VRMS.
The binned min. / max. and linear CTR characteristics make these devices well suited for DC or AC voltage detection. Eliminating the phototransistor base connection provides added electrical noise immunity from the transients found in many industrial control environments.
Because of guaranteed maximum non-saturated and saturated switching characteristics, the ILD1615, ILQ1615 can be used in medium speed data I/O and control systems. The binned min. / max. CTR specification allow easy worst case interface calculations for both level detection and switching applications. Interfacing with a CMOS logic is enhanced by the guaranteed CTR at IF = 1.0 m A.
A1 C2 A3 C4
A1 C2 A3 C4 A5 C6 A7 C8
8C 7E 6C 5E
16 C 15 E 14 C 13 E 12 C 11 E 10 C 9E
LINKS TO ADDITIONAL RESOURCES
FEATURES
- Operating temperature from -55 °C to +110 °C
- Identical channel to channel footprint
- Dual and quad packages feature
:
- Reduced board space
- Lower pin and parts count
- Better channel to channel CTR match
- Improved mon mode rejection
- Isolation test voltage, 5300 VRMS
- Material categorization: for definitions of pliance please see .vishay./doc?99912
AGENCY APPROVALS
- UL 1577
- c UL
- DIN EN 60747-5-5 (VDE 0884), available with option 1
- FIMKO
Product Page
Rev. 1.9, 11-Jan-2024
Document Number: 82582
For technical questions, contact: optocoupleranswers@vishay.
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT .vishay./doc?91000
.vishay.
End of Life June-2024
ILD1615, ILQ1615
Vishay Semiconductors
ORDERING INFORMATION
L...
