BZW04-14B
BZW04-14B is Transient Voltage Suppressors manufactured by Vishay.
- Part of the BZW04P5V8 comparator family.
- Part of the BZW04P5V8 comparator family.
.vishay.
BZW04-5V8 thru BZW04-376
Vishay General Semiconductor
TRANSZORB® Transient Voltage Suppressors
DO-41 (DO-204AL)
Features
- Glass passivated chip junction
- Available in uni-directional and bi-directional
- 400 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty cycle): 0.01 %
- Excellent clamping capability
- Very fast response time
- Low incremental surge resistance
- Solder dip 275 °C max. 10 s, per JESD 22-B106
- AEC-Q101 qualified
- Material categorization: for definitions of pliance please see .vishay./doc?99912
PRIMARY CHARACTERISTICS
VWM VBR (uni-directional)
VBR (bi-directional) PPPM PD
IFSM (uni-directional only) TJ max. Polarity
5.8 V to 376 V 6.45 V to 462 V 6.45 V to 462 V
400 W 1.5 W 40 A 175 °C Uni-directional, bi-directional
Package
DO-41 (DO-204AL)
DEVICES FOR BI-DIRECTION APPLICATIONS
For bi-directional types, use B suffix (e.g. BZW04P-6V4B). Electrical characteristics apply in both directions.
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, puter, industrial, and telemunication.
MECHANICAL DATA
Case: DO-41 (DO-204AL), molded epoxy over passivated chip Molding pound meets UL 94 V-0 flammability rating Base...
