PI2125 Datasheet | Vicor Corporation

PI2125 Cool-ORing TM Series 30 Volt, 12 Amp Full-Function Active ORing Solution Description The Cool-ORing PI2125 is a plete full-function Active ORing solution with a high-speed ORing MOSFET controller and a very low on-state resistance MOSFET designed for use in redundant power system architectures. The PI2125 Cool-ORing solution is offered in an extremely small, thermally enhanced 5mm x 7mm LGA package and can be used in high side Active ORing applications on bus voltages up to 12V. The PI2125 enables extremely low power loss with fast dynamic response to fault conditions, critical for high availability systems. A master/slave feature allows the paralleling of PI2125 solutions for high current Active ORing requirements. The PI2125, with its 5.5mΩ internal MOSFET provides very high efficiency and low power loss during steady state operation, while achieving highspeed turn-off of the internal MOSFET during input power source fault conditions that cause reverse current flow. The PI2125 provides an active low fault flag output to the system during excessive forward current, light load, reverse current, overvoltage, under-voltage and over-temperature fault conditions. A temperature sensing function indicates a fault if the maximum junction temperature exceeds 160°C. The under-voltage and over.. voltage thresholds are programmable via an external resistor divider. TM Features - - - - - - - - - Integrated High Performance 12A, 5.5mΩ MOSFET Very-small, high density fully-optimized solution providing simple PCB layout. Fast Dynamic Response to Power Source failures, with 160ns reverse current turn-off delay time Accurate sensing capability to indicate system fault conditions Programmable under & over-voltage functions Over temperature fault detection...