Datasheet4U Logo Datasheet4U.com

UH8104 - HALL EFFECT MICRO SWITCH IC

General Description

The UH8104 is a low power, pole independent Hall-effect switch with a latched digital output driver.

It can work in 2.5V supply.

Either a north or south pole of sufficient flux will turn the output on.

Key Features

  • S.
  • Micro power operation.
  • 2.5V to 5.5V battery operation.
  • Offset Canceling Technology.
  • Independent of North or South Pole Magnet.
  • Superior temperature stability.
  • Extremely Low Switch-Point Drift.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
UH8JT High Voltage Ultrafast Rectifier Vishay Siliconix

Other Datasheets by Unisonic Technologies

Part Number Description
UH8100 LOW POWER HALL EFFECT SWITCH
UH8102 LOW POWER HALL EFFECT SWITCH
UH8103 HALL EFFECT MICRO SWITCH IC
UH8105 HALL EFFECT MICRO SWITCH
UH8013 HALL EFFECT MICRO SWITCH IC

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD UH8104 HALL EFFECT MICRO SWITCH IC CMOS IC „ DESCRIPTION The UH8104 is a low power, pole independent Hall-effect switch with a latched digital output driver. It can work in 2.5V supply. Either a north or south pole of sufficient flux will turn the output on. In the absence of a magnetic field, the output is off. When a magnetic field enters the hall element and exceeds the operate point BOPS(or less than BOPN) the output turns on (output is low). When the magnetic field is below the release point BRPS (or above BRPN), the output turns off (output is high). It is designed with open drain configuration and connecting to a pull up resistor from Output to VDD is necessary. „ FEATURES * Micro power operation * 2.5V to 5.