Datasheet4U Logo Datasheet4U.com

PA7493 - 2W x 2 CLASS AB AUDIO POWER AMPLIFIER

Description

UTC PA7493 provides precise DC volume control, and a stereo bridged audio power amplifiers capable of producing 2W into 4Ω as a monolithic integrated circuit.

In stand-by the power consumption is very low.

Features

  • Stereo switch able bridged/single-ended power amplifiers.
  • Output power 2W × 2 (VCC=6V, THD=1%, RL=4Ω).
  • Low harmonics distortion.
  • Include 32 steps volume controller by DC voltage with ysteresis.
  • “Click and pop” suppression circuitry.
  • Low current consumption in.

📥 Download Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
UNISONIC TECHNOLOGIES CO., LTD PA7493 2W X 2 CLASS AB AUDIO POWER AMPLIFIER (WITH DC_VOLUME CONTROL)  DESCRIPTION UTC PA7493 provides precise DC volume control, and a stereo bridged audio power amplifiers capable of producing 2W into 4Ω as a monolithic integrated circuit. In stand-by the power consumption is very low. UTC PA7493 combines a stereo single-end (SE) mode for headphone drive into a single chip and a stereo bridge-tied loads (BTL) mode for speaker drive(both modes are easily switched by the SE/BTL input control signal) to simplify the audio system design. Package size is not occupies PCB space cause the built-in over-temperature protection. It is suitable for small or portable products.
Published: |